Tornio automatik

Traub TNL12/7

TECHNICAL DATA

Headstock
Max. bar diameter (mm): 13.0
Material quality (DIN 671) (mm): Ø Xh9
Collet (optional): through-hole
Guide bush (optional): through-hole
Max. turning length / headstock stroke:
with fixed guide bush (mm): 140
with rotating guide bush (mm): 80
with programmable guide bush (mm): 80
Spindle speed (rpm): 12,000
C-axis electronic resolution (degrees): 0.001
Rapid traverse Z1 (m/min): 30

Tool Turret 1
Cross-slide travel X1 (mm): 35
Cross-slide travel Y1 (mm): 38 (-10 +28)
Rapid traverse X1 / Y1 (m/min): 15
Tool positions (number): 6 (12)
Turning tool shank (mm): 8x8 or 12x12
Clamping diameter for driven drilling tools (mm): 0.5 - 7
Chip-to-chip time (s): 0.3

Tool Turret 2
Cross-slide travel X2 (mm): 35
Cross-slide travel Z2 (mm): 50
Rapid traverse X2/Z2 (m/min): 15
Tool positions (number): 6
Turning tool shank (mm): 8x8 or 12x12
Clamping diameter for driven drilling tools (mm): 0.5 - 7
Chip-to-chip time (s): 0.3

Tool drive for tool turrets 1 and 2
Speed (rpm): 0...8000
Max. number of driven tools: 2x6
Clamping diameter for drilling tools (mm): 0.5 - 7

Sub-spindle / Front Device
Max. bar diameter (mm): 13.0
Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 / 228
Rapid traverse Z3, Z4/X3 (m/min): 30
Tool positions (number): 4
Speed (rpm): 12,000
C-axis electronic resolution (deg): 0.001

Rear Working Device (dragged / fixed)
Stroke Z, dragged with work spindle (mm): 80
Tool holder diameter (mm): 20
Tool positions (number): 3

Rear Working Device (X4 axis)
Stroke X4 (mm): 42
Rapid traverse speed (m/min): 15
Tool holder diameter (mm): 28
Tool positions (number): 4

Tool drive for rear working device (with X4 axis)
Speed (rpm): 0...10,000
Max. driven tools (number): 4
Clamping diameter for drilling tools
driven (mm): 0.5 - 7
non-driven (mm): 0.5 - 10

Coolant System
Duodpfxjyr N Dze Agpjp
Pump pressure single-stage (bar): 3
Tank capacity (l): 180
Flow rate (l/min): 40

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.