Hüttenhölscher makinë shpimi

Hüttenhölscher Drilling rig

This Hüttenhölscher Drilling line was manufactured in 2010. It features a PC-controlled function sequence under Windows 7, TwinCAT, and a used drilling system with a 6-station loading gantry. The rig includes a 2-axis gantry robot, Y/Z axes with servo motors, and a travel distance of Y-axis 8500 mm, Z-axis 1500 mm. It also has a suction crossbeam with a four-circuit vacuum supply. Contact us for more information about this machine.

• Used drilling system consisting of a 6-station loading gantry
• 2-axis gantry robot
• Y/Z axes with servo motors
• Travel distances: Y-axis 8500 mm, Z-axis 1500 mm
• Suction crossbeam with four-circuit vacuum supply
• Vacuum generation by means of ejector
• Length: 300 - 2250 mm
• Width: 350 - 710 mm
• Thickness: 16 - 25 mm
• Stack height: Max. 1000 mm (60 parts) including protective plate
• Drilling gear: Two 16-spindle drilling gears
• Callable spindles: 8000 rpm
• Groove saw (support 1) for cutting special rear wall grooves
• Sawing unit with tool holder, speed control via frequency converter
• 2x milling spindles right/left at front edge (support 1)
• Base frame as welded construction with machined screw-on surfaces
• Support can be moved in the X direction by means of a servomotor
• Drilling gear a=32 mm, adjustable with frequency converter, drill chuck Ø 10h7 with grub screw
• 4 stacking stations
• 1 hand rest station / automatic - manual feeding
• 1 removal station / automatic - manual removal
• Floor roller conveyor / stack feed
• 4 roller conveyor lines: 930 mm wide x 3600 mm long
• AH 300 mm
• Feeding / removal: manual cross transfer carriage
• Transport section: 950 mm wide x 4100 mm long
• Integrated side stop
• Manual feeding
• Toothed belt section: 900 mm wide x 2500 mm long
Bedpfxjx Tkauo Ab Ascw
• Pneumatic lift for toothed belt conveyors
• Pneumatic double clamping cylinders, controlled by ball screw and servo motor
• Drilling gear a=32 mm, adjustable with frequency converter
• Pneumatically pilot-controlled working position
• Transfer shuttle: Toothed belt section 900 mm wide x 2500 mm long
• Return transport section: 950 mm wide x 4000 mm long
• Pneumatic stopper
• Horizontal stroke approx. 2500 mm by means of three-phase motor
• Rotation by three-phase motor by +/- 90°
• Discharge stations / automatic removal
• Positioning of cabinet parts by encoder
• Protective system for feeding
• 45 m protective fence with 3 access doors
• 2 sliding doors for feeding the floor roller conveyors