Qendër rrotullimi vertikale me një gisht

EMAG VL 400 (Siemens)

Vertical Single-Spindle Turning Center / Vertical Lathe
Manufacturer: EMAG
Model: VL 400 (Siemens)
Year of manufacture: 2021
Operating hours: approx. 1,848

Turret base unit and cross-slide unit with Y-axis

HP turret drive unit for driven tools (C442)
with internal coolant supply to the tool
Max. speed: 6,000 rpm
Nominal speed: 3,200 rpm
Tool holder unit for driven tools: 12 x BMT75

Rotary workpiece transport system, O-version
Drag frame system for 10 workpieces
Max. workpiece height (incl. workpiece pallet): 300 mm
Max. workpiece weight: 60 kg

Set (10 pieces) of drag frames for O-belt
For workpiece diameter: 150 - 400 mm

Blow-off for workpiece and clamping device (Pick-Up)

Coolant supply: 15 bar
Coolant pump capacity approx. 80 l/min at 15 bar
Cooling unit (6.5 kW, water - air)
A cooling unit (with 2-circuit technology) regulates the machine’s thermal balance.
Spindle drive, control cabinet, and turret are maintained at ambient temperature
(10°C - 40°C).

Coolant dual filter, manually switchable
Filtration rate 100 μm, with electric and mechanical contamination indicator

Chip conveyor
Hinged belt design, discharge to rear
Chip discharge height 1,100 mm (with integrated coolant tank, approx. 500 l capacity)

Emulsion mist extraction: extraction capacity approx. 800 m³/h
Rinse gun

Workpiece measurement with probe
air blow-off for probe
Tool life monitoring (sister tool management)

Tool breakage monitoring TOOLINSPECT MCU-EUROPA
(SIEMENS 840Dsl, FANUC 31i/32i)

3-color signal tower

Axial drilling-milling head – BMT75 CC
5x angular drilling-milling head 90° – BMT75 CC (i=1:1)
Set of tools for OP10 + OP20

Hydraulic power chuck cylinder size 150 – with 1 media feedthrough
Max. pull force 10,850 daN at 70 bar

Coolant through spindle
Programmable clamping pressure adjustment

3-jaw power chuck KNCS-N 500-155 quick change
max. = 2,200 rpm (rated speed as per DIN 6386)
Set of hard base jaws
Set of soft top jaws

Accessories for KNCS-N 500-155
Flushing nozzle in chuck bore

Additional tool holders with tools:
1x 8.BMT25VL8IKX50 finishing external turning tool
1x 8.BMT25VL8IKX50 roughing external turning tool
1x 60.7516VL8IKDI15 engraving tool
1x 60.7516VL8IKDI15 thread tapping holder
1x 40.75V5KRVL8IKD face mill 50 mm
3x 80.75V5VL8IKD boring bar holders
2x 27.V520HYDL26 drill Ø 20 mm
1x 42.V522L08Ik drill Ø 22 mm
Gjdpovq Iwyjfx Aabsuk
1x 27.V514WNL31 drill Ø 14 mm

Software package
Operation manual / Maintenance manual
101225ä

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.