Frezë CNC vertikale me kolonë lëvizëse me Heidenhain iTNC 530, VMC, qendër vertikale për përpunim BADECKEL MAHO (DMG)
DMF 220 Linear - iTNC
Frezë CNC vertikale me kolonë lëvizëse me Heidenhain iTNC 530, VMC, qendër vertikale për përpunim BA
DECKEL MAHO (DMG)
DMF 220 Linear - iTNC
çmim fiks plus TVSH
35 000 €
Gjendje
I përdorur
Vendndodhje
Hessisch Lichtenau 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Frezë CNC vertikale me kolonë lëvizëse me Heidenhain iTNC 530, VMC, qendër vertikale për përpunim BA
- prodhues:
- DECKEL MAHO (DMG)
- Model:
- DMF 220 Linear - iTNC
- Gjendje:
- i përdorur
Çmimi & Vendndodhja
çmim fiks plus TVSH
35 000 €
- Vendndodhje:
- 37235 Hessisch Lichtenau

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A19740150
- Numri i referencës:
- 62058
- përditësim:
- së fundmi më 14.09.2025
Përshkrim
CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO
Vertical Machining Center Type DMF 220 linear
Serial No.: 15115223474 Year of manufacture: 2008
CNC 3-D contouring control Heidenhain iTNC 530
Travel X: 2200 mm, Y: 560 mm, Z: 720 mm
Table size 2600 x 605 mm
Table load capacity 2200 kg
Table height above floor 870 mm
Nwodpow Iqt Ajfx Ahzjn
Distance table to spindle nose max. 752 mm
Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872
Spindle speed max. 12,000 rpm
Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle
Feed rate 0–20,000 mm/min
Rapid traverse X-axis 100 m/min
Rapid traverse Y+Z-axis 50 m/min
Power supply 400 Volt, 50 Hz, 73 kVA
- 30-position tool changer
- Internal coolant supply through the spindle, 40 bar (IKZ)
- Air blast with minimum quantity lubrication for tool cooling
- Air blast through spindle center via M-function
- 2 rotating safety windows
- Operating mode 4, process monitoring during production
- Electronic handwheel at the handheld command station
- Separate coolant treatment system, paper band filter with filtration sump
- Chip conveyor for positioning under the work area
- Centralised grease lubrication
- Operating manual
- Operating hours – control on = 75,188 h
- Operating hours – program run or spindle on = 31,632 h
- Controller with interfaces for data transfer, RS232C + USB
Footprint L x W x H 650 x 400 x 280 cm
Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel)
Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg)
Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg)
Main machine transport dimensions L x W x H 500 x 248 x 275 cm
Additional transport space required for further parts 550 x 240 x 250 cm
Weight of main machine approx. 12.5 t
Good condition
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Vertical Machining Center Type DMF 220 linear
Serial No.: 15115223474 Year of manufacture: 2008
CNC 3-D contouring control Heidenhain iTNC 530
Travel X: 2200 mm, Y: 560 mm, Z: 720 mm
Table size 2600 x 605 mm
Table load capacity 2200 kg
Table height above floor 870 mm
Nwodpow Iqt Ajfx Ahzjn
Distance table to spindle nose max. 752 mm
Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar DIN 69872
Spindle speed max. 12,000 rpm
Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle
Feed rate 0–20,000 mm/min
Rapid traverse X-axis 100 m/min
Rapid traverse Y+Z-axis 50 m/min
Power supply 400 Volt, 50 Hz, 73 kVA
- 30-position tool changer
- Internal coolant supply through the spindle, 40 bar (IKZ)
- Air blast with minimum quantity lubrication for tool cooling
- Air blast through spindle center via M-function
- 2 rotating safety windows
- Operating mode 4, process monitoring during production
- Electronic handwheel at the handheld command station
- Separate coolant treatment system, paper band filter with filtration sump
- Chip conveyor for positioning under the work area
- Centralised grease lubrication
- Operating manual
- Operating hours – control on = 75,188 h
- Operating hours – program run or spindle on = 31,632 h
- Controller with interfaces for data transfer, RS232C + USB
Footprint L x W x H 650 x 400 x 280 cm
Space requirement for main machine L x W x H 490 x 395 x 275 cm (with control panel)
Space requirement for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg)
Space requirement for coolant unit L x W x H 180 x 115 x 190 cm (500 kg)
Main machine transport dimensions L x W x H 500 x 248 x 275 cm
Additional transport space required for further parts 550 x 240 x 250 cm
Weight of main machine approx. 12.5 t
Good condition
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2013
Dërgo kërkesë
Telefon & Faks
+49 5602 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim





















