Qendër makinerizuese vertikale CNC me 5 bosht.

Wenzler VKM 1-1

Wenzler VKM 1-1 CNC Vertical 5-Axis Machining Center
Description
Type: CNC Vertical 5-Axis Machining Center
Manufacturer: Wenzler
Model: VKM 1-1
Year of Construction: 2016
Serial Number: 466
Condition: Used
Quantity: 1
HS Code: 84571090

Item Description
The lot includes:

One CNC Vertical 5-Axis Machining Center and accessories

Technical Data
Machine History and Condition
The machine was used as a demonstration machine from 2016 to 2022.

From 2022, it was used in production at HAL Automotive Plauen GmbH for machining axle carriers. Before being put into operation in production, the machine was overhauled and upgraded.

A new milling spindle was acquired in December 2024. The spindle has a running time of approximately 500 operating hours. Operating hours: approx. 24,000 hours

Working Area
X-axis: 1,500 mm
Y-axis: 1,250 mm
Z-axis: 880 mm
Feed Rate / Rapid Traverse
X-axis: 100 m/min
Y-axis: 100 m/min
Z-axis: 100 m/min
Axis Acceleration
X-axis: 7 m/s²
Y-axis: 7 m/s²
Z-axis: 10 m/s²
Jerk: 150 m/s³
Table Load
Maximum Workpiece Weight: 400 kg
Spindle
Tool Interface: HSK 100
Maximum Spindle Speed: 10,000 rpm
Power, S6 / 40% Duty Cycle: 40 kW
Maximum Torque: 175 Nm
Tool Magazine
Djdpfozrv Dgox Actokr
Number of Positions: 36
Maximum Tool Length: 520 mm
Maximum Tool Diameter with Empty Adjacent Position: 205 mm
Maximum Tool Weight: 20 kg
Maximum Total Magazine Load: 200 kg
Tool Change Time: 3 seconds
Equipment Included in the Scope of Supply
Chip Conveyor
Cooling Unit
Cooling Unit
Manufacturer: Lahntechnik GmbH
Model: KESY 280-01
Serial Number: 2017-05981
Year of Construction: 2017
Rated Power: 13.6 kW
Rated Voltage: 400 V / 3~ / PE / 50 Hz
Control Voltage: 24 V DC
Protection Class: IP54
Refrigerant: R410A – 10.03 t CO₂ equivalent
Maximum Operating Pressure: 30 bar HD / 19 bar ND
Dry Weight: 400 kg
Country of Origin: Germany

Not Included in the Scope of Supply
The machine or the economic asset does not include product-specific tools, fixtures or robot grippers. Operational Status and Inspection
The machine was taken out of production in October 2025 due to the factory closure.

The machine is still connected to the power supply and can be inspected in this condition. However, a test run is not possible as no machine operator is available.

Please view the videos recorded by the machine in December 2025.

Transport and Loading
No special transport securing is required.

Special lifting and transport equipment from Wenzler is required for loading and unloading. The buyer must rent this equipment directly from Wenzler / Heller Group.

After lifting and unloading, the buyer is responsible for returning the equipment to Wenzler.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.