Portal me 5 bosht WALDRICH SIEGEN PF-F150

WaldrichSiegen PF-F 150 530/400

Make : Waldrich - Siegen
- Typ : PF-F-150(1)-530/400
- No. : 11.093/0
- Age : Overhault 2004 ( Euro 2.2 Mil)
X Travel : 12.000
- Y Travel : 7.300
- Z Travel : 3.000
- W Travel : 4.000
- Between column : 5.000
- Table width : 4.730
Gkjdpfx Asytrxksk Djc
- Table length : 12.000
- Table load : 19 t / mtr. Ca. 250 ton
- Table feed : 10.000 mm/min.
- W axis : 3.000 mm/min.
- T axis : 6.000 mm/min.
- Cross adj. milling head :
- Vert. adj. cross rail :
- Horizontal hydrostatic spindle ram
- Milling spindle Ø : 560
- Milling tool taper : iso 60
- C axis feed : 5.000 mm/min.
- Milling motor : 90 kW
- Spindle speed : 2.500 R/pm
- Z axis stroke : 3.000
- Z axis feed : 2.000 mm/min.

- Milling Küma Angle head WF2 90 kw- 450
- Milling Küma Uni. UB1D 60 kw - 2400
- Milling Küma Fixed GB1D 90 kw- 2400
- Milling Küma Angle head WF1?
- Electric requirement : 3 x 400 V / 50 Hz
- Power requirement : 600 kVA / 630 Amp
- Capacity 4.000 L coolant true spindle 20/40 Bar
Machine is rebuild in 2004 by Schiess
Bed – Table assembly group:
* Renewal of sliding lining
* Grinding of guideway
* Renewal of table drive
* Direct linear measuring syst.
* Hydrostatic
Portal and cross rail:
* Modification of adjusting spindle trape
Zoidal spindle was recplaced with ball screw
* Direct linear measuring syst.
* New drive motors for relization of higer
speed on feed axes of milling support.
* New milling support with hydrostatic guideways
Electric system:
* Complet elctric cabinet switchgear
* Complet new wire
* Siemens Sinumrik 840 D in 6 axis !!
Equipment / parts :
* Complet new raumag janich covers
* Complet new double chip conveyor
* Complet with big tooling packet
* Complet with big mounting equipment
- Under power in Europe
- Free directly
- Controlled axis X / Y / Z / W / C / B axis
- Over all height : 10.475 mm
- Over all width : 11.934 mm
- Over all length : 30.000 mm
- Total weight : ca. 400.000 Kg

Rebuild in 2004 for EUR 2.200.000 !This CNC Waldrich Portal milling machines was used in the Energie Field for steam turbien case machining.
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!