KBA40/11000Jansen Maschinen GmbH
KBA40/11000
KBA40/11000
Jansen Maschinen GmbH
KBA40/11000
Viti i prodhimit
2017
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Rastdorf 

Të dhëna bazë
- Përshkrimi i makinës:
- KBA40/11000
- Prodhues:
- Jansen Maschinen GmbH
- Model:
- KBA40/11000
- Numri i makinës:
- 17.018.011
- Viti i prodhimit:
- 2017
- Gjendje:
- i përdorur
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
- Vendndodhje:
- Rastdorf, Gjermania

Telefononi
Detaje teknike
Boshtet
Shpejtësia e boshtit (maks.):
3 000 rrot/min
Detaje të fuqisë
Tensioni hyrës:
380 V
Lloji i rrymës hyrëse:
tre fazë
Dokumentacion dhe çertifikim
Dokumentacion / manual
Material/produkte të përpunueshme
Peshë e pjesës së punueshme (maks.):
3 500 kg
Specifikimet e boshtit
Distanca lëvizëse e boshtit X:
11 000 mm
Distanca e lëvizjes së boshtit Y:
500 mm
Distanca e lëvizjes së boshtit Z:
500 mm
Lëvizje e shpejtë e boshtit Z:
5 m/min
Lëvizje e shpejtë boshti X:
20 m/min
Lëvizje e shpejtë boshti Y:
10 m/min
Detaje të mëtejshme
Kapaciteti i shpimit:
40 mm
Shpejtësia rrotulluese pafundësisht e ndryshueshme
Detajet e ofertës
- ID e shpalljes:
- A23345423
- Përditësim:
- së fundmi më 17.11.2026
Përshkrim
The CNC drilling machine KBA 40 is a development specifically designed for craft businesses and metalworking companies. Time-consuming measuring, marking, and center-punching are no longer necessary.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Iede Akrktepfx Afretp
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Efficiency and quality are the primary focus of this machine. The machine is Made in Germany, and the components used are from well-known national manufacturers.
The used machine consists of 3 table modules with a travel distance of 11,000 mm.
The coolant supply is provided by a 20-liter reservoir tank in the drilling table. A feed pump transports the coolant emulsion to the drill bit. An internal pipe system returns the emulsion to the tank.
Technical data:
Drilling capacity in S355: Ø40mm
Thread drilling capacity: M30
Spindle power: 9.40 KW
Spindle speed: 3000 min-1
Spindle mount: SK40 DIN 69871-1
Travel X: 3,300mm - 18,900mm
Maximum travel speed: 20m/min
Travel Y: 500mm
Maximum travel speed: 10m/min
Travel Z: 500mm
Maximum travel speed: 5m/min
Table height: 825mm
Repeat accuracy: +/- 0.1mm/m
Iede Akrktepfx Afretp
Traveling tool changer
The tool changer can hold 10 tools. Because the tool changer is mounted on the X-axis and moves with it, the tool change can always be performed in place.
Lifting roller track system
- with 10 mm lift
- with ball-bearing rollers
- roller width 500 mm
- roller diameter 60 mm
- roller spacing approx. 600 mm
- lifting force per roller 200 kg
Each roller is equipped with 2 mounted rocker arms. The lifting movement is generated via tie rods with an upstream pneumatic cylinder drive.
The roller track is prepared for mounting on the T-slots of the drilling table.
Each unit consists of 6 lifting roller systems with a pneumatic drive and is designed for the length of a drilling table.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Dokumente
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
Së fundmi online: Sot
I regjistruar që nga: 2026
2 Njoftime online
Dërgo kërkesë
Telefon & Faks
+49 5956 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim














