Frezë portale me dinamikë të lartëFPT Industrie
DINOMAX 1
Frezë portale me dinamikë të lartë
FPT Industrie
DINOMAX 1
Viti i prodhimit
2013
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Borgo San Dalmazzo 

Të dhëna bazë
- Përshkrimi i makinës:
- Frezë portale me dinamikë të lartë
- Prodhues:
- FPT Industrie
- Model:
- DINOMAX 1
- Viti i prodhimit:
- 2013
- Gjendje:
- shumë mirë (i përdorur)
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
- Vendndodhje:
- Via Vecchia Di Cuneo 51/A, 12011 Borgo San Dalmazzo, Italia

Telefononi
Detaje teknike
Dimensionet dhe pesha
Gjatësia e tryezës:
4 000 mm
Gjerësia e tavolinës:
2 000 mm
Boshtet
Hundë boshti:
63
Shpejtësia e boshtit (maks.):
22 000 rrot/min
Specifikimet e boshtit
Distanca lëvizëse e boshtit X:
4 000 mm
Distanca e lëvizjes së boshtit Y:
2 200 mm
Distanca e lëvizjes së boshtit Z:
1 100 mm
Shpejtësia e ushqyerjes së boshtit X:
50 m/min
Shpejtësia e ushqimit Boshte Y:
50 m/min
Shpejtësia e furnizimit boshti Z:
50 m/min
Detaje të mëtejshme
Tufë:
128 Nm
Detajet e ofertës
- ID e shpalljes:
- A22077993
- Përditësim:
- së fundmi më 29.09.2026
Përshkrim
CNC Heidenhain iTNC 530 S.P.
WORKING AREA
Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50
WORKTABLE
Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement.
AXIS CHARACTERISTICS
Axis feed rate: mm/min 50.000 Acceleration: m/s² 4
WORKING AREA (CLEARANCES)
Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330
CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE
Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors.
B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893
The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity.
CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK)
30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips.
Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10
MEASURING SCALE PRESSURIZATION
Pneumatic system complete with control unit for pressurizing the measuring scales.
SPRAY-MIST TOOL LUBRICATION/COOLING
Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality.
EXTERNAL TOOL COOLING
Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar.
REQUIRED CONNECTIONS
Maximum installed power: kW 150 Maximum current required: A 235
MACHINE EQUIPPED WITH:
Knedpfszb Evljx Afred
• Heidenhain HR550 remote electronic handwheel
• Various tooling included with the machine
• Renishaw probe
• BLUM laser presetting system
• AUTOCAL automatic head calibration system
• Visormax subscription for remote monitoring
• Electrical cabinet air conditioning unit
• Cooling system for all axes and the electrospindle
• No. 2 chip conveyors positioned on both sides of the worktable
• User and maintenance manual and CE declaration of conformity
WORKING AREA
Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50
WORKTABLE
Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement.
AXIS CHARACTERISTICS
Axis feed rate: mm/min 50.000 Acceleration: m/s² 4
WORKING AREA (CLEARANCES)
Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330
CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE
Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors.
B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893
The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity.
CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK)
30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips.
Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10
MEASURING SCALE PRESSURIZATION
Pneumatic system complete with control unit for pressurizing the measuring scales.
SPRAY-MIST TOOL LUBRICATION/COOLING
Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality.
EXTERNAL TOOL COOLING
Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar.
REQUIRED CONNECTIONS
Maximum installed power: kW 150 Maximum current required: A 235
MACHINE EQUIPPED WITH:
Knedpfszb Evljx Afred
• Heidenhain HR550 remote electronic handwheel
• Various tooling included with the machine
• Renishaw probe
• BLUM laser presetting system
• AUTOCAL automatic head calibration system
• Visormax subscription for remote monitoring
• Electrical cabinet air conditioning unit
• Cooling system for all axes and the electrospindle
• No. 2 chip conveyors positioned on both sides of the worktable
• User and maintenance manual and CE declaration of conformity
Dokumente
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2020
21 Njoftime online
Dërgo kërkesë
Telefon & Faks
+39 0171 ... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Borgo San Dalmazzo
1 093 km
Frezë portale me shpejtësi të lartë
FPT IndustrieDINOMAX 1
FPT IndustrieDINOMAX 1
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Auenwald
1 202 km
Makinë matëse koordinatash
ZEISSPrismo 7 - 9.12.7
ZEISSPrismo 7 - 9.12.7
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Matelica (MC)
637 km
Qendrat e përpunimit - 5-bosht
FPT IndustrieSTINGER
FPT IndustrieSTINGER
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Babberich
1 602 km
Makinë shpimi me vrima të thella 2000 x 1300 x 1500
TBTBW 250 S
TBTBW 250 S
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Denzlingen
1 239 km
Qendër CNC për tornim dhe frezim
MAZAKIntegrex i-250H S 1000U
MAZAKIntegrex i-250H S 1000U
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Sheffield
2 112 km
CNC torno
Hyundai WiaL300C
Hyundai WiaL300C
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Baienfurt
1 116 km
Mulliri portal
StyrotecFS10 ST
StyrotecFS10 ST
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Dortmund
1 505 km
Mbajtësit e mjeteve të drejtuara drejt
NACKE + WTOVDI 50
NACKE + WTOVDI 50
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Gjermania
1 340 km
Qendra e kthesës dhe bluarjes CNC
DMG MORICTX Beta 500 V6
DMG MORICTX Beta 500 V6
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Cestona
1 856 km
Torno CNC
GEMINISGHT 4 720X3000
GEMINISGHT 4 720X3000
Njoftimi juaj u fshi me sukses
Ndodhi një gabim














































































