Elumatec SBZ 122/73, përfshirë eluCad

elumatec AG SBZ 122/73

Information about the machine:

The machine comes from a metal construction company specializing in the production of windows, doors, and façades made from aluminum. It was purchased in 2018 to relieve several 5-axis machines, specifically for the manufacturing of aluminum front doors. Due to operational restructuring, this machine was no longer used and was released for sale.

The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s facility. All worn parts have been replaced.

Part programs can be created either directly at the machine (eluCam) or using the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g., from LogiKal or Wictop.

Machine description:

- Efficient machining of aluminum, plastic, and steel profiles
- Continuously positionable A-axis from -120 to +120 degrees
- Linear guides for clamp movement
- Processing results are improved by intelligent control technology
- Rapid positioning of the machining unit with speeds up to 120 m/min thanks to dynamic servo drives
- Thread cutting without compensating chuck
- Automatic clamp recognition and positioning
- Automatic tool changer
- 4-axis control
- No reference run required for main axes due to absolute encoder systems
- Collision avoidance via automatic clamp recognition and positioning
- Power torque milling motor with closed-loop speed control for short spindle ramp-up and braking times
- Certified, drive-integrated safety functions

Low power consumption due to intelligent control. Energy recovery via DC-link coupling of the axis drives with regenerative feedback and braking energy buffering.

Green-Line cooling unit for the control cabinet with reduced energy consumption.

- Windows operating system
- 15" flat screen, USB ports and network connection
- Simple and convenient program entry using eluCam at the operating terminal – even during machining
- Remote maintenance via TCP/IP with internet access

Equipment:
- Safety enclosure for operator protection
- Four horizontal pneumatic clamping units
- Material stop left
- Minimum quantity lubrication
Bjdpfeyr H Abjx Aizoli
- Handheld control device
- Depth gauge

Technical data:
- Max. machining length (without face-side machining): 4,050 mm
- X-axis travel: 4,176 mm, Vmax. 120 m/min
- Y-axis travel: 1,040 mm, Vmax. 60 m/min
- Z-axis travel: 540 mm, Vmax. 30 m/min
- Machining directions: 3+2 (top, rear, front)
- Positioning accuracy: +/- 0.1 mm
- Max. spindle speed: 20,000 rpm
- Spindle power: 7 kW, S1 (water-cooled)
- Tool holder: HSK-F63
- Automatic tool change
- 12 tool positions in automatic magazine
- Max. disk cutter diameter: 120 mm
- Max. tool length (from taper): 150 mm
- Automatic clamp movement
- Spanner Basic (with round guide)
- Software: eluCam

- Compressed air supply: >7 bar
- Electrical connection: 400 V, 50 Hz, 22 A
- Air consumption per minute approx. 185 l with spray

Accessories for the machine (used):
- Full enclosure SBZ122/7x (rear wall + roof)
- Complete HSK-F63 d16 L=155 holder for disk cutter
- Disk cutter D=92x6.0 mm Z=14 d=16, carbide teeth
- Right stop SBZ 122170171173 with second clamping circle, for overlength processing
- Various used tool holders and cutters
- ESTA swarf extraction system

eluCad
- License for connection to eluCad
- eluCad data import package for ECW, NCW, and V6 files

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.