Qendër e përpunimit vertikal

DAHLIH MCV-860 mit RoboJob MA 25

In-stock machine "NEW" - available for immediate delivery! (Subject to prior sale)

Control system: Fanuc 0i-MF Plus, 10.4"
with Manual Guide i & 2 MB NC memory
LOOK-AHEAD function, 400 blocks

Machine table:
Table size: 950 x 550 mm
Load capacity: 800 kg
Width of T-slots: 18 mm
Number of T-slots: 3
Distance between T-slots: 150 mm

Travel ranges:
Pgjdpfx Aieifn N Ne Dou
Travel distances X/Y/Z: 860/550/550 mm
Spindle nose to table surface: 150 - 700 mm

Linear guides & speeds:
Ball guides in X/Y-axis
Roller guides in Z-axis
Rapid traverse X/Y/Z: 40/40/30 m/min
Feed rate during milling: 0 – 10,000 mm/min
Smallest increment: 0.001 mm

Tool magazine (CAM-type) / changer:
Number of magazine positions: 30
System: random access
Max. tool diameter: Ø 75 mm
Max. tool diameter with free adjacent slots: Ø150 mm (40 tools: Ø130 mm)
Max. tool length: 300 mm
Max. tool weight: 7 kg

Spindle:
Spindle taper: SK-40
Drive power (30min/cont.): 18.5/11 kW
15,000 rpm direct spindle drive
Spindle oil cooler

Coolant, chip, and compressed air management:
Coolant system incl. 300 liter tank and pumps
External coolant around the spindle
Chip conveyors on the right and left in the machine bed
Compressed air nozzle on the spindle (M32/M33)
Compressed air through the spindle (M38/M39)
Compressed air and coolant gun

Other:
Swiveling control panel
Electronic handwheel (wired)
Centralized lubrication oil / air
Full enclosure
Work light
Heat exchanger on the control cabinet
Auto-Power OFF function
Hand tool set
Signal light
Transformer 400 VAC, 50 Hz
CE declaration of conformity according to European directives

Electrical and pneumatic requirements:
Electrical connection: 36 kVA
Required pneumatic inlet pressure: 6 bar

Dimensions:
Machine size: W2,260 x D2,900 x H2,775 mm
Required footprint: W3,160 x D3,000 x H3,000 mm
(including chip conveyor, discharge to the left)
Machine weight: approx. 5,400 kg (net)

Existing special equipment:

Spindle:
- Direct drive spindle SK-40, 15,000 min-1
- Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor)

Tool magazine / changer:
- Tool drum magazine with 30 positions, DIN69871, SK-40

Rotary or additional axes:
- Preparation for 4th axis (FANUC control),
incl. wiring and Harting connector without axis drive

Coolant, chip, and compressed air management:
- Bed flushing
- IKZ coolant pump with 20 bar pressure, for direct-drive spindles
- incl. cartridge filter
- Belt-type chip conveyor incl. chip cart (chip removal to the front, left side of the machine)

Measuring and monitoring systems:
- RENISHAW OMP-60 measuring probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm
- RENISHAW NC4+ tool laser measuring system and tool breakage monitoring in the machine, incl. holder

- Auto-Door (side door)
- Pneumatic interface for workpiece clamping
- Clamping devices as shown in the picture

with RoboJob Mill Assist 25kg (year of manufacture 2025 - NEW)
- Full enclosure
- Dual gripper

available immediately

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.