Nxjerrja e tymrave të saldimit OS 3008

Viber-system OS 3008

The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals.
It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment.
Suction power: 3000 m^3/h
These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer.
In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically.

Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air.

Air volume (m^3/h) 3000
Pressure (Pa) 2000
Filter efficiency (%) 99.9
Power (kW) 3
Filter area 30
Filter size 700 x 750 x 1700 mm
Voltage (V) 380
Weight (kg) 90
Bsdstu H N Hopfx Af Sjdi