Makinë prerëse me lazer

Mazak OPTIPLEX NEXUS 3015 FIBER

MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW
CNC Fiber Laser Cutting Machine

Price: EUR 190,000 net
Condition: Used – VERY LOW OPERATING HOURS
Resonator: IPG YLS-4000 U

VERY LOW WORKING HOURS

The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition:
- Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h)
- Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways
- Cutting quality and precision comparable to a new machine
- Operating hours confirmed by CNC readout – documentation available upon request or during inspection

TECHNICAL SPECIFICATIONS

Model: Optiplex Nexus 3015 Fiber
Laser Type: Ytterbium fiber laser
Resonator: IPG YLS-4000 U
Laser Power: 4.0 kW
Max. Sheet Size: 1,525 x 3,050 mm
Max. Pallet Load: 930 kg
Travel (X/Y/Z): 3,100 / 1,580 / 150 mm
Rapid Traverse (X/Y): 60 m/min (85 m/min combined)
Drive X1/X2/Y: Rack & pinion, direct-drive
Drive Z: Servo, ball screw
Accuracy X/Y: ±0.05 mm / 500 mm
Repeatability: ±0.03 mm
Head: Multi-Control Torch 2.1, F125-F200 mm
Assist Gases: O2, air, third gas; 0.02–2.5 MPa
CNC: Mazatrol Preview G, 19" touchscreen
Pallet Changer: Automated, 2-pallet
Weight: Approx. 12,850 kg
Power: 380–480 V, max. 18 kW

CUTTING CAPACITY (4 kW)

Mild steel O2: 20 mm
Mild steel N2: 4 mm
Stainless steel N2: 15 mm
Aluminum N2: 15 mm
Copper O2: 8 mm
Brass N2: 8 mm

INTELLIGENT FUNCTIONS (INCLUDED)

Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut.

SCOPE OF DELIVERY (INCLUDED IN PRICE)

Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN).

OPTIONAL EQUIPMENT – NOT INCLUDED

The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost.

OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net

Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs.

Components:
1. Compressor SK 25 / max. 15 bar / SK.2-13318
2. Condensate Drain Ultramat UFM-D03
3. Economizer Ultra-Filter DF 0035 - DF 1100
4. Ultra-Filter DF 0035 - DF 1100
5. Pressure vessel, 500 l

Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm.

OPTION B – SHEET LOADING CRANE – EUR 5,500 net

Cjdpfxsy Dgxuj Afpsgu
Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet.

PRICE SUMMARY (NET, EUR)

Machine only: EUR 190,000
Option A (pressure unit): EUR 15,000
Option B (loading crane): EUR 5,500
Total with both options: EUR 210,500

COMMERCIAL TERMS

- All prices are net, in EUR (VAT not included)
- Offer valid for 30 days
- Payment and delivery terms to be agreed
- Inspection and test cutting available by appointment

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.