Furrë tharëse

SAT NORMA-SAT 3.5 m³ BT 150°C

Internal dimensions: Width 1350 mm - Height 1900 mm - Depth 1350 mm.

Working temperature: 100°C, uniformity ±5°C, empty oven, stabilized condition, measured 150 mm from the walls and 300 mm from the door.

Maximum design temperature: 150°C/air.

Internal panels: galvanized steel.

External panels: painted steel, sand color 42 for the panels and RAL 3020 red for the framework.

Insulation: 60 mm rock wool.

Door: 1 leaf - silicone gasket - right-hand hinges.

Floor: without floor.
Blodpfey Ipzmox Apnog

Heating: electric - power 12 kW/contactors.

Controller: ERO ELECTRONIC brand TMS microprocessor type. Setpoint and temperature display - PID control. Calibrated type K thermocouple.

Process timer with indicator light; temperature reached and end of timer (cycle) - Type Timer 815.

Temperature safety: heating shut-off, audible and visual alarm in case of temperature overrun, restart after fault acknowledgment.

Automatic start/stop timer.

Internal ventilation: Flow rate: 6600 m3/h - Motor power: 1.5 kW.

Exhaust: 1 extraction port, 100 mm diameter.

Intake: 1 intake port + metal mesh filter.

Electrical cabinet: Power supply voltage 3 x 400 V, 50 Hz. Control circuit voltage 110 VAC. Locked with RONIS key (1242 E or triangle). Wiring of all components is in compliance with CE - EN 60204 standards. Electrical components are from the following brands: TELEMECANIQUE, SOCOMEC, MAF, LEGRAND.

• Equipment available for inspection near LYON.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.