Linja e prodhimit të parketitSelect_Unigripper_Meler_CSP
2 laags parket lijminstallatie
Linja e prodhimit të parketit
Select_Unigripper_Meler_CSP
2 laags parket lijminstallatie
Çmim fiks plus TVSH
22 500 €
Viti i prodhimit
2016
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Heeswijk Dinther 

Të dhëna bazë
- Përshkrimi i makinës:
- Linja e prodhimit të parketit
- Prodhues:
- Select_Unigripper_Meler_CSP
- Numri i makinës:
- 1
- Viti i prodhimit:
- 2016
- Gjendje:
- i përdorur
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
Çmim fiks plus TVSH
22 500 €
- Vendndodhje:
- Heeswijk Dinther, Holanda

Telefononi
Detaje teknike
Detaje të fuqisë
Lloji i rrymës hyrëse:
tre fazë
Detajet e ofertës
- ID e shpalljes:
- A22945826
- Përditësim:
- së fundmi më 11.10.2026
Përshkrim
Machine components:
1. End-jointing machine
a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm
b. Infeed roller conveyor with grippers
c. “Meler” B4 VS glue melting unit
d. Crosscut saw Ø 300 mm and 2004
2. Parquet gluing machine
a. Buffer
b. Glue roller
c. Stacking mechanism
d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm
Hfjdpfx Aloz Rkbcsgsn
e. Traverse carriage
3. Glue presses
Option 1: Crosscutting to pre-set lengths
In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted.
Option 2: Gluing to standard lengths without crosscutting
Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw.
Last modification to the machine: 2018
YouTube video:
shorts/VhgYFOVvSfY?feature=share
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
1. End-jointing machine
a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm
b. Infeed roller conveyor with grippers
c. “Meler” B4 VS glue melting unit
d. Crosscut saw Ø 300 mm and 2004
2. Parquet gluing machine
a. Buffer
b. Glue roller
c. Stacking mechanism
d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm
Hfjdpfx Aloz Rkbcsgsn
e. Traverse carriage
3. Glue presses
Option 1: Crosscutting to pre-set lengths
In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted.
Option 2: Gluing to standard lengths without crosscutting
Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw.
Last modification to the machine: 2018
YouTube video:
shorts/VhgYFOVvSfY?feature=share
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
Së fundmi online: javën e kaluar
I regjistruar që nga: 2025
3 Njoftime online
Dërgo kërkesë
Telefon & Faks
+31 6 510... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim









































