Sander rrip të gjerëSCM
dmc sd 60 RCS 135
Sander rrip të gjerë
SCM
dmc sd 60 RCS 135
Viti i prodhimit
2024
Gjendje
makinë ekspozite
(plotësisht funksionale)
Vendndodhje
Bad Sooden-Allendorf 

Të dhëna për makinën
- Përshkrimi i makinës:
- Sander rrip të gjerë
- Prodhues:
- SCM
- Model:
- dmc sd 60 RCS 135
- Viti i prodhimit:
- 2024
- Gjendje:
- si e re (makineri ekspozite)
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
- Vendndodhje:
- Werrastraße 20, 37242 Bad Sooden-Allendorf, Deutschland

Telefononi
Detaje teknike
- Gjerësia e bluarjes:
- 1 350 mm
Detajet e ofertës
- ID e shpalljes:
- A16332157
- Numri i referencës:
- N3540
- Përditësim:
- së fundmi më 09.03.2026
Përshkrim
SCM Wide Belt Calibration and Fine Sanding Machine
Model: dmc sd 60 RCS 135
Technical Specifications:
Working width: 1,100 mm
Min./max. working height: 4–170 mm
Abrasive belt width: 1,120 mm
Abrasive belt length: 2,150 mm
Main motor power: 11 (15) kW (HP)
Gear motor: 0.45/0.8 (0.6/1.1) kW (HP)
Feed speed: 4.5/9 m/min
Standard equipment:
- R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position
- R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position
- Hard sanding pad with manual working height adjustment
Gbsdpotwqn Sjfx Aclol
- Motor power for unit 1: 11 kW (15 HP)
- Electronic ammeter for main motor indicating current draw
- Electronic work height display
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Anti-kickback device at infeed before first unit
- 60 Shore rubber feed belt
- Roller table with two rollers at infeed and outfeed of working table
- Feed belt with two speeds 4.5 / 9 m/min driven by gear motor
- Automatic belt centering
Including the following special accessories:
1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment
1 pc. CE safety standards
1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers
1 pc. "RA" diagonally grooved steel contact roller, 1st unit
1 pc. main motor 15 kW
1 pc. abrasive belt wear optimizer
1 pc. LED interior lighting
1 pc. door with viewing window on rear side
1 pc. Logic SC control
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Model: dmc sd 60 RCS 135
Technical Specifications:
Working width: 1,100 mm
Min./max. working height: 4–170 mm
Abrasive belt width: 1,120 mm
Abrasive belt length: 2,150 mm
Main motor power: 11 (15) kW (HP)
Gear motor: 0.45/0.8 (0.6/1.1) kW (HP)
Feed speed: 4.5/9 m/min
Standard equipment:
- R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position
- R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position
- Hard sanding pad with manual working height adjustment
Gbsdpotwqn Sjfx Aclol
- Motor power for unit 1: 11 kW (15 HP)
- Electronic ammeter for main motor indicating current draw
- Electronic work height display
- Electronically controlled sanding belt oscillation
- Rubber pressure rollers
- Anti-kickback device at infeed before first unit
- 60 Shore rubber feed belt
- Roller table with two rollers at infeed and outfeed of working table
- Feed belt with two speeds 4.5 / 9 m/min driven by gear motor
- Automatic belt centering
Including the following special accessories:
1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment
1 pc. CE safety standards
1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers
1 pc. "RA" diagonally grooved steel contact roller, 1st unit
1 pc. main motor 15 kW
1 pc. abrasive belt wear optimizer
1 pc. LED interior lighting
1 pc. door with viewing window on rear side
1 pc. Logic SC control
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2009
100 Njoftime online
Dërgo kërkesë
Telefon & Faks
+49 5652 ... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
Njoftim i vogël
Deutschlandsberg
738 km
Makineri bluarje për dru të vetëm
HESSJunior
HESSJunior
Njoftim i vogël
Krauchenwies
1 153 km
Makinë bluarëse rrotulluese Panhans 245/20
Panhans245/20
Panhans245/20
Njoftim i vogël
Cantù
1 025 km
Makinë bluarëse për trashësi
SCMS 630/E
SCMS 630/E
Njoftim i vogël
Teisendorf
948 km
Sander rrip të gjerë
HeesemannJSM 1350 RC
HeesemannJSM 1350 RC
Njoftim i vogël
Strenči
1 875 km
Linja e renditjes
AlmabDry board sorting line
AlmabDry board sorting line
Njoftim i vogël
Gorzów Wielkopolski
1 343 km
Makina e brezit të skajeve Hebrock K 36 Next
HebrockK36 Next
HebrockK36 Next
Njoftim i vogël
Oberkochen
1 160 km
Makinë bluarëse
LÖWERDSM 2004 Video
LÖWERDSM 2004 Video
Njoftim i vogël
Aalen
1 161 km
Kapëse
RUCHSERJumbo Automatic Video
RUCHSERJumbo Automatic Video
Njoftim i vogël
Juszczyn
953 km
Format sharrë
AltendorfF45
AltendorfF45
Njoftim i vogël
Willroth
1 431 km
Sander rrip të gjerë
HOMAGSANDTEQ W-300
HOMAGSANDTEQ W-300
Njoftimi juaj u fshi me sukses
Ndodhi një gabim











































































