Presë për briketa

mütek MRZ 530 ECO - 11 kW

Single-shaft shredder MRZ 530

Included:
Eco Ring Rotor (for reduced energy consumption)

Options:
Veneer and paper scraper + €970 net
* recommended for extremely thin materials with a thickness of less than 3 mm

Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction lumber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design that guarantees consistent quality in continuous operation.

We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos.

Machine data:
Motor: 11 kW; 400 V - 50 Hz - 3 phase,
Knives: multi-reversible,
Rotor diameter: 260 mm,
Control: Siemens S7-1200 PLC,
Hopper (mm) 510 x 810 mm,
Hopper volume approx. 0.4 m³,
Hydraulically operated slide,
Screen size optional (10 - 40mm),
Suction nozzle Ø 160 mm,
Weight approx. 1,000 kg,
Dimensions approx. 1550 x 1100 x 1640 mm,
Moisture content of the raw material: must be below 30% (dry basis).

Standard included:
• Fast hydraulics
Gbodsd Db N Iopfx An Eew
• Profile rotor
• Control cabinet with Siemens PLC control
• Automatic star/delta start
• Automatic OFF when the rotor is idling
• Removable suction channel
• Speed 70 - 100 RPM for higher throughput
• Cycle control to avoid idle times
• Performance-enhancing step control of the hydraulic slide
• Stable guides for the hydraulic slide

Further shredder options:
- Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net
- Inclined conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable from 0-60 degrees
Discharge height: approx. 2000 mm
+ - 100 mm
- Over-belt magnet + €5,980 net
- Control for conveyor belt and over-belt magnet + €2,750 net
(Start and stop synchronized with the shredder)

Requirements for the input/raw material:
- The moisture content (dry basis) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.