Makinë bluarëse për trashësiHofmann
D 636
Makinë bluarëse për trashësi
Hofmann
D 636
VB plus TVSH
18 000 €
Viti i prodhimit
2023
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Seeshaupt 

Të dhëna bazë
- Përshkrimi i makinës:
- Makinë bluarëse për trashësi
- Prodhues:
- Hofmann
- Model:
- D 636
- Viti i prodhimit:
- 2023
- Gjendje:
- shumë mirë (i përdorur)
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
VB plus TVSH
18 000 €
- Vendndodhje:
- Flurweg 12, 82402 Seeshaupt, Deutschland

Telefononi
Detaje teknike
Dimensionet dhe pesha
Peshë totale:
1 000 kg
Detaje të mëtejshme
Fuqi:
7,5 kW (10,20 HP)
Numri i thikave:
4
Gjerësia e bluarjes:
625 mm
Shpejtësia rrotulluese (min.):
5 000 rrot/min
Diametri i veglës:
125 mm
Detajet e ofertës
- ID e shpalljes:
- A22782095
- Përditësim:
- së fundmi më 18.09.2026
Përshkrim
4-knife TERSA cutter head for planer
Motor power 7.5 kW
Positioning control for the thickness table
Segmented infeed roller
Segmented pressure bar
Feed speeds of 7 + 14 m/min
Table extension
Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm
Thickness table mounted on four support spindles and with 4-point guidance.
Heavily ribbed cast iron table, finely planed
Modern control panel ergonomically positioned.
Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode,
Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the
cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear)
Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the
outfeed pressure bar
Two feed speeds 7 + 14 m/min; electrically switchable, also during planing
Hnedjz Dkftepfx Ab Njw
Thickness hood with carpet support, can be used as a storage area for wood.
Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site)
Air velocity 22 m/s
Integrated tool storage compartment for operating tools and planing knives
Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the
discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual
Weight: approx. 1000 kg
CE-compliant, BG-Holzstaubgeprüft No. HM 23001
Workplace-related emission values dB(A) according to DIN 45635 Part 1650
Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A)
Workplace-related dust emission value: 0.44 mg/m³
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Motor power 7.5 kW
Positioning control for the thickness table
Segmented infeed roller
Segmented pressure bar
Feed speeds of 7 + 14 m/min
Table extension
Planing width 625 mm, chip removal up to 8 mm, planing height 3.5-305 mm
Thickness table mounted on four support spindles and with 4-point guidance.
Heavily ribbed cast iron table, finely planed
Modern control panel ergonomically positioned.
Electric thickness table adjustment with LED display. Buttons for adjusting in rapid or slow mode,
Adjustment accurate to 1/10 mm; integrated operating hour counter. Electronic starting and braking system. Electronic, wear-free brake for safe stopping of the
cutter head. Infeed roller in rubber and two rubber outfeed rollers (high quality, low wear)
Segmented pressure bar, rotary knob with scale, for adjusting the pressure (preload) of the
outfeed pressure bar
Two feed speeds 7 + 14 m/min; electrically switchable, also during planing
Hnedjz Dkftepfx Ab Njw
Thickness hood with carpet support, can be used as a storage area for wood.
Dust extraction port Ø 160 mm, to the left (can also be on the right – can be easily converted on site)
Air velocity 22 m/s
Integrated tool storage compartment for operating tools and planing knives
Electrical equipment according to VDE/EN 60204 with main switch, emergency stop button and 2nd emergency stop button on the
discharge side, winding protection, undervoltage protection, contact for controlling the dust extraction, accessories: 1 set of knives installed, operating tools, grease gun, operating manual
Weight: approx. 1000 kg
CE-compliant, BG-Holzstaubgeprüft No. HM 23001
Workplace-related emission values dB(A) according to DIN 45635 Part 1650
Idle noise approx. 69 dB(A), operating noise approx. 79 dB(A)
Workplace-related dust emission value: 0.44 mg/m³
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2013
19 Njoftime online
Dërgo kërkesë
Telefon & Faks
+49 8801 ... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Teisendorf
948 km
Makinë bluarëse për trashësi
HofmannD 636
HofmannD 636
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Bitburg
1 442 km
Sharrë tërthore dhe mitra
GrauleZS 200 N - 5 KW Motor
GrauleZS 200 N - 5 KW Motor
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Gjermania
1 340 km
Sistemi i nxjerrjes
Höcker PolytechnikVacumobil VT 200-L
Höcker PolytechnikVacumobil VT 200-L
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Bitburg
1 442 km
Planifikues sipërfaqësor
MartinT 54 - sofort verfügbar
MartinT 54 - sofort verfügbar
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Bitburg
1 442 km
Makinë mulliri me bosht të ngurtë frezimi
HolzkraftMinimax T 45 c LL
HolzkraftMinimax T 45 c LL
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Bitburg
1 442 km
Kthyeshëm frezë / formues gisht
SCM HolzkraftMinimax t 55 es LL
SCM HolzkraftMinimax t 55 es LL
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Bitburg
1 442 km
Planer i gjerë
MartinT45 - sofort verfügbar -
MartinT45 - sofort verfügbar -
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Achern
1 268 km
Njësia e shtypit trarë e ngjitur
SCHWÖRERHydraulisch
SCHWÖRERHydraulisch
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Raasdorf bei Wien
838 km
Sharrë formatuese
AltendorfF 45 Elmo
AltendorfF 45 Elmo
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Naprawa
946 km
Makineri për trashësi, rende
SCMS630 CLASS
SCMS630 CLASS
Njoftimi juaj u fshi me sukses
Ndodhi një gabim











































































