Lëmuese me rrip të gjerëA.Costa
KKH-CCT+CCT 1350
Lëmuese me rrip të gjerë
A.Costa
KKH-CCT+CCT 1350
Viti i prodhimit
2008
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Trondheim 

Të dhëna bazë
- Përshkrimi i makinës:
- Lëmuese me rrip të gjerë
- Prodhues:
- A.Costa
- Model:
- KKH-CCT+CCT 1350
- Viti i prodhimit:
- 2008
- Gjendje:
- gati për përdorim (i përdorur)
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
- Vendndodhje:
- Stokkanhaugen 116, 7048 Trondheim, Norway

Telefononi
Detaje teknike
Detaje të fuqisë
Tensioni hyrës:
400 V
Frekuenca e hyrjes:
50 Hz
Lloji i rrymës hyrëse:
Kondicioner ajri
Detaje të mëtejshme
Lartësia e bluarjes:
160 mm
Gjerësia e bluarjes:
1 250 mm
Detajet e ofertës
- ID e shpalljes:
- A23314455
- Përditësim:
- së fundmi më 10.11.2026
Përshkrim
Working width 1250 mm.
Longitudinal sanding belt length mm. 2620
Standard working thickness mm. 3÷160
3 units from the bottom
3 units from the topp
First machine:
1st Bottom Working unit:
C250 - Working unit with cylinder ø mm. 250
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Bottom Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure
Iodpj Aiua Defx Afrjtp
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
Second machine:
1st Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with steel surface and helicoidal grooves for cooling C-steel
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
2nd Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Top Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily
interchangeable; depth of deployment mechanically adjustable
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180
SR - Rotary blowers for blowing the dust.
For technical specification please read included data sheet below.
This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.
Longitudinal sanding belt length mm. 2620
Standard working thickness mm. 3÷160
3 units from the bottom
3 units from the topp
First machine:
1st Bottom Working unit:
C250 - Working unit with cylinder ø mm. 250
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Bottom Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure
Iodpj Aiua Defx Afrjtp
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
Second machine:
1st Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with steel surface and helicoidal grooves for cooling C-steel
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 37
Cutting speed of sanding belt m./sec. 30
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
2nd Top Working unit:
C250 - Working unit with cylinder ø mm. 250 - Complete with: sanding belt tensioning unit;
Electronic oscillation; dust hoods; safety systems. Is included an eccentric mechanism to compensate the variation of thickness of the abrasive belt.
Cylinder with rubber surface and helicoidal grooves for cooling, hardness Sh 90
Pneumatic Grit-set - for setting the working height in relation to sanding belt thickness, with support on a revolving turret at 4 pre-set positions. Stand-by position with quick exclusion of cylinder in case of stop in emergency.
Motor with one speed of rotation, with power kW 30
Cutting speed of sanding belt m./sec. 25
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
3rd Top Working unit:
T1 - Pneumatic pad unit with electronic control of timing of entry and adjustable pressure of contact element; contact insert made by a graphite cloth + felt + steel blade, assembly easily
interchangeable; depth of deployment mechanically adjustable
Motor with one speed of rotation, with power kW 18
Cutting speed of sanding belt m./sec. 16
B1 - Standard oscillating air jet blowers for sanding belt cleaning, complete with dust hood
S180 - Nylon brush unit for cleaning processed work-pieces - motor kW. 1,1 ø mm.180
SR - Rotary blowers for blowing the dust.
For technical specification please read included data sheet below.
This CCT 1350 line are stil in use here in Norway, will be ready for dissembling from 20 of December 2026.
Dokumente
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2002
5 Njoftime online
Dërgo kërkesë
Telefon & Faks
+47 90 96... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Kłodawa
1 349 km
SZLIFIERKA COSTA TYP ACT 1150 SERIA A
SZLIFIERKA COSTA TYP ACT 1150 SERIA ASZLIFIERKA COSTA TYP ACT 1150 SERIA A
SZLIFIERKA COSTA TYP ACT 1150 SERIA ASZLIFIERKA COSTA TYP ACT 1150 SERIA A
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Itali
638 km
Profilues me dy skaje - makinë e vetme
CELASCHIPROGRESS CR75-4050
CELASCHIPROGRESS CR75-4050
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Oliveira de Frades
2 374 km
Lëmuese me rrip të gjerë
COSTA LEVIGATRICIKK9 CCCT CCCT 1650
COSTA LEVIGATRICIKK9 CCCT CCCT 1650
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Kanzach
1 139 km
Linja e lidhjes së gishtit
NKT
NKT
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Kolding
1 777 km
Linjë automatike paketimi me fletë najloni tkurrëse për parket
CSP ENGINEERINGPAR
CSP ENGINEERINGPAR
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Roreto
1 078 km
Linjë profilimi me dy funde, katër anësore
CELASCHI (SCM Group)TSA 480 + TSA 360
CELASCHI (SCM Group)TSA 480 + TSA 360
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Austri
890 km
Sander rrip të gjerë
KündigKündig Botop
KündigKündig Botop
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Bergeijk
1 602 km
Makinë për heqjen e brirëve të fletëve të metalit
Q-Fin Quality Finishing SolutionsF200XL - VAC
Q-Fin Quality Finishing SolutionsF200XL - VAC
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Dietzenbach
1 323 km
Makinë bluarëse sipërfaqësore për bluarje të lagësht
GreifGB 212-7
GreifGB 212-7
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Kanzach
1 139 km
Presë ngjitëse
Weing DimterProfipress L2500
Weing DimterProfipress L2500
Njoftimi juaj u fshi me sukses
Ndodhi një gabim





















































































































