Linja e plotë e shisheve
Linja e plotë e shisheve
Gjendje
I përdorur
Vendndodhje
Fumane (Verona) 

Të dhëna bazë
- Përshkrimi i makinës:
- Linja e plotë e shisheve
- Gjendje:
- i përdorur
Çmimi & Vendndodhja
- Vendndodhja e shitësit:
- Via Incisa 1, 37022 Fumane (Verona), Itali

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A18905511
- Numri i referencës:
- LC545
- Përditësim:
- së fundmi më 09.04.2025
Përshkrim
Used Bottling Line HDPE for dairy products 7200 bph
Kdjdpfowa Tqiex Afrew
Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity
The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition.
Container Type and Format Flexibility of the Used Bottling Line HDPE
The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors.
Bottle Feeding and Preparation Section
At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages.
Weight-Based Filling and Snap-On Capping
The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time.
Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE
After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.
Kdjdpfowa Tqiex Afrew
Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity
The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition.
Container Type and Format Flexibility of the Used Bottling Line HDPE
The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors.
Bottle Feeding and Preparation Section
At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages.
Weight-Based Filling and Snap-On Capping
The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time.
Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE
After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.
Këto njoftime mund t'ju interesojnë edhe ju.
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Gjermania
1 340 km
Makinë për prerje me tel
GF Agie CharmillesROBOFILL 240 SLP
GF Agie CharmillesROBOFILL 240 SLP
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Velp
1 612 km
Makinë për përpunimin e grurit
Bühler SangatiSGS T-30
Bühler SangatiSGS T-30
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Gërshërë për çelik profili
Peddinghaus210/13
Peddinghaus210/13
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Frezë
MikronWF 31D
MikronWF 31D
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Gjermania
1 340 km
Makinë mbështjellëse rrjedhëse
RovemaVXP 250/340
RovemaVXP 250/340
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Makinë shpimi precize
Hauser5
Hauser5
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Makinë automatike grushtimi
SchaalSEP 63
SchaalSEP 63
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Stary Sącz
937 km
Linjë mbushjeje për vaj, uthull, lëngje etj.
PROSPOMASZ MONO-30JAWOTECH Tech-Lab HM
PROSPOMASZ MONO-30JAWOTECH Tech-Lab HM
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Shtypi hidraulik
Hans SchoenSH/LF100
Hans SchoenSH/LF100
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Parti tavolinash rrotulluese
Rundteiltische
Rundteiltische
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Hamburg
1 575 km
Makinë mbushëse për lëngje
AMTECLF300A 2HD
AMTECLF300A 2HD
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Lëmues me rrip të gjatë
KuhlmeyerEBS21
KuhlmeyerEBS21
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Makineri për drejtimin e fletëve të metaleve
Blechtrichtmaschine
Blechtrichtmaschine
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Menslage
1 583 km
Ekrani i shisheve ALWID Posimat Access N15 (2021)
ALWIDFlaschenaufsteller
ALWIDFlaschenaufsteller
I suksesshëm
Mesazhi juaj u dërgua.
Ankand
Përfundon në
d
h
min
s
Ankandi përfundoi
Baden-Württemberg
1 175 km
Prerës kallaji
Mubea
Mubea
Njoftimi juaj u fshi me sukses
Ndodhi një gabim






































































































































































