Krones Ergomodul ngjitës i ftohtë / etiketues me ngjitës të lagësht (2020)

Krones Kaltleim / Nassleimetikettierer

Overview

Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section.

Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection.

Technical data

- Manufacturer: Krones
- Model: Ergomodul
- Year of manufacture: 2020
- Table pitch diameter: 1,200 mm
- Rotary plates: 30
- Machine pitch: 125.6 mm
- Main drive: controlled servo motor; Danfoss servo motors, container table
- Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar
- Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm
- Container infeed: worm with servo drive; detects damaged and fallen-over containers
- Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed
- Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply
- Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control
- Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass)
Dwedpfxszzz N Ho Ackjb
- Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components
- Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A
- Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water
- Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg)

Equipment

- 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable
- 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable
- Stand-alone control cabinet with Krones iPanel operator terminal
- Central lubrication (Lincoln progressive distributor with motor pump)
- Ecopush rejection module
- Handling parts set on trolleys

The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine.

Condition

Used, still installed and under power in an operating line; on-site inspection possible before purchase.

Availability

Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.