MAKINË PËR NDËRMARRJE TË BUZËVE TË NJË KANË (Majtas)IMA
Novimat / I / G80 / 440 / R3
MAKINË PËR NDËRMARRJE TË BUZËVE TË NJË KANË (Majtas)
IMA
Novimat / I / G80 / 440 / R3
Gjendje
I përdorur
Vendndodhje
Roreto 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- MAKINË PËR NDËRMARRJE TË BUZËVE TË NJË KANË (Majtas)
- Prodhues:
- IMA
- Gjendje:
- shumë mirë (i përdorur)
Çmimi & Vendndodhja
- Vendndodhje:
- Via Savigliano, 29, 12062 Roreto CN, Italia

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A15678601
- Numri i referencës:
- X10027
- Përditësim:
- së fundmi më 06.02.2025
Përshkrim
SINGLE-SIDE EDGE BANDER (LEFT-side)
Edges (tape) thickness in rolls (min/max) mm 0,3 / 3
Veneer edges limited possible up to max. 1.0 mm
Nwjdpfjr Ttfljx Ahzon
Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA)
Numerical Control / Software ICOS Open
Adjustable feeding speed (m/min ) 6 - 30
Top pressure system with driven rubber belt
Spraying unit (Anti-sticking liquid)
In-feed fence
Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5)
Glueing Unit (Hot Melt glue) 04.1570
Pressure zone
Edge coils supporting unit (No. of reels) 2
Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min)
Fine Trimming unit 08.055 (2 x Kw 1) 0°-30°
Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo
Profile Scraping unit 08.519
Glue scraping unit 08.50
Buffing unit 08.617 (2 x Kw 0,25)
Milling grooving unit 08.190 (1 x Kw 4,5)
Edges (tape) thickness in rolls (min/max) mm 0,3 / 3
Veneer edges limited possible up to max. 1.0 mm
Nwjdpfjr Ttfljx Ahzon
Panels thickness (min/max) 8 mm. 40 mm (with MFA) / 60 mm (without MFA)
Numerical Control / Software ICOS Open
Adjustable feeding speed (m/min ) 6 - 30
Top pressure system with driven rubber belt
Spraying unit (Anti-sticking liquid)
In-feed fence
Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5)
Glueing Unit (Hot Melt glue) 04.1570
Pressure zone
Edge coils supporting unit (No. of reels) 2
Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66) 0°-25° (max 30 m/min)
Fine Trimming unit 08.055 (2 x Kw 1) 0°-30°
Multi Function Unit (Profile contour Trimming unit) by N.C. 08.342 (2 x Kw 0,66) servo
Profile Scraping unit 08.519
Glue scraping unit 08.50
Buffing unit 08.617 (2 x Kw 0,25)
Milling grooving unit 08.190 (1 x Kw 4,5)
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2008
Dërgo kërkesë
Telefon & Faks
+39 0172 ... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
njoftim i vogël
Gjermania
1 340 km
Edgebander
IMANovimat Concept / I / G80 / 440 / R3
IMANovimat Concept / I / G80 / 440 / R3
Njoftimi juaj u fshi me sukses
Ndodhi një gabim












































