LUFT 1500 VSD+PM COMPACT + depo 500LCORMAK
LUFT 1500 VSD+PM COMPACT + 500L tank
LUFT 1500 VSD+PM COMPACT + depo 500L
CORMAK
LUFT 1500 VSD+PM COMPACT + 500L tank
çmim fiks plus TVSH
4 679 €
Viti i prodhimit
2026
Gjendje
I ri
Vendndodhje
Siedlce 

Të dhëna për makinën
- Përshkrimi i makinës:
- LUFT 1500 VSD+PM COMPACT + depo 500L
- Prodhues:
- CORMAK
- Viti i prodhimit:
- 2026
- Gjendje:
- i ri
Çmimi & Vendndodhja
çmim fiks plus TVSH
4 679 €
- Vendndodhje:
- Brzeska 120, 08-110 Siedlce, Polska

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A21043232
- Përditësim:
- së fundmi më 22.01.2026
Përshkrim
CORMAK LUFT 1500 VSD+PM Compact screw compressor with dryer – compact set for demanding applications – ENERGY SAVER
SET INCLUDES:
LUFT 1500 VSD+PM COMPACT screw compressor with dryer.
Horizontal compressed air receiver 500 L.
Key features that distinguish these models:
1. Permanent Magnet (PM) Motor Technology
Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors:
They achieve efficiency levels compliant with IE4 or even IE5 standards.
They maintain high efficiency even at very low speeds, where standard motors lose performance.
They are smaller, lighter and generate less heat.
2. Advanced Inverter Control (VSD)
The core of the Energy Saver line is a frequency converter (inverter).
Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy.
Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which:
Protects the plant’s electrical installation.
Allows frequent start-stops without overheating the windings.
4. Real Savings
In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life.
Technical Parameters
Motor power 11 kW / 15 HP
Fgodpfxjychbae Aqcjd
Voltage 400V / 50Hz
Output 0–6 bar 1620 L/min
Output at 6 bar 1580 L/min
Output at 8 bar 1350 L/min
Output at 10 bar 1230 L/min
Outlet connection (G) 1"
Dimensions 1600 × 740 × 1750 mm
Weight 500 kg
SET INCLUDES:
LUFT 1500 VSD+PM COMPACT screw compressor with dryer.
Horizontal compressed air receiver 500 L.
Key features that distinguish these models:
1. Permanent Magnet (PM) Motor Technology
Most Energy Saver compressors use Permanent Magnet motors. Unlike standard induction motors:
They achieve efficiency levels compliant with IE4 or even IE5 standards.
They maintain high efficiency even at very low speeds, where standard motors lose performance.
They are smaller, lighter and generate less heat.
2. Advanced Inverter Control (VSD)
The core of the Energy Saver line is a frequency converter (inverter).
Demand matching: The compressor does not operate on an “all-or-nothing” basis. If your system requires only 30% capacity, it reduces speed accordingly, consuming proportionally less energy.
Elimination of idle operation: Conventional compressors often run unloaded for several minutes after filling the tank, consuming around 25–30% of rated power without producing air. Energy Saver models virtually eliminate this loss.
3. Soft Start
Thanks to the inverter, these units start smoothly from 0 Hz, eliminating current surges at start-up, which:
Protects the plant’s electrical installation.
Allows frequent start-stops without overheating the windings.
4. Real Savings
In practice, Energy Saver technology reduces electricity bills by 30% to 50% compared with fixed-speed compressors. It also maintains very stable network pressure (within 0.1 bar), essential for precision equipment such as laser cutters. Extended service life: Smooth pressure and temperature changes prolong screw element life.
Technical Parameters
Motor power 11 kW / 15 HP
Fgodpfxjychbae Aqcjd
Voltage 400V / 50Hz
Output 0–6 bar 1620 L/min
Output at 6 bar 1580 L/min
Output at 8 bar 1350 L/min
Output at 10 bar 1230 L/min
Outlet connection (G) 1"
Dimensions 1600 × 740 × 1750 mm
Weight 500 kg
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2020
499 Njoftime online
Dërgo kërkesë
Telefon & Faks
+48 25 63... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
Njoftim i vogël
Gjermania
1 340 km
Cilindër shpues
HeidelbergOHT
HeidelbergOHT
Njoftim i vogël
Erlangen
1 181 km
Kompresor me vida
KAESERSXC 8
KAESERSXC 8
Njoftim i vogël
Malax
2 417 km
Sharrë presje RANDEK SP700
Njoftim i vogël
Brandbu
2 244 km
Tavolinë pune për ndërtimin e mureve
RandekBS05 og BS10U
RandekBS05 og BS10U
Njoftim i vogël
Santiago de Compostela
2 355 km
Makineri trokel me stampim të nxehtë
HUATAIHT760T
HUATAIHT760T
Njoftim i vogël
Bischofszell
1 119 km
Makinë qepur
FRANK‘ SCHE516
FRANK‘ SCHE516
Njoftim i vogël
Siedlce
1 235 km
Kompresor vidhos me tharëse
CORMAKLUFT 1500 COMPACT
CORMAKLUFT 1500 COMPACT
Njoftim i vogël
Erlangen
1 181 km
Kompresor me vida 9 kW me tharëse
KaeserSM16T
KaeserSM16T
Njoftim i vogël
Gjermania
1 340 km
Vinç urë lëvizëse
ABUSELK
ABUSELK
Njoftim i vogël
Gjermania
1 340 km
Tavolinë me pjerrësi për ngarkim
HeglaART 6133-S
HeglaART 6133-S
Njoftimi juaj u fshi me sukses
Ndodhi një gabim










































































