Robotët industrialëCloos
2 Qirox Roboter auf Bodenfahrbahn
Robotët industrialë
Cloos
2 Qirox Roboter auf Bodenfahrbahn
viti i prodhimit
2019
Gjendje
I përdorur
Vendndodhje
Gjermania 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Robotët industrialë
- prodhues:
- Cloos
- viti i prodhimit:
- 2019
- Gjendje:
- i përdorur
- funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
- Vendndodhje:
- Oberpfalz, Deutschland

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A19042101
- përditësim:
- së fundmi më 06.05.2025
Përshkrim
System consisting of:
1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive
Software expansion for each robot:
Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 single-wire tandem welding equipment with automatic torch change system:
2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning
Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2
2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m,
1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm
Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status.
Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator.
Njdpfx Ahowgd Hzszelh
1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct
Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive
Software expansion for each robot:
Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance
2 ICSE LD offline lasers
Robot 1 single-wire tandem welding equipment with automatic torch change system:
2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning
Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2
2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m,
1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm
Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status.
Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator.
Njdpfx Ahowgd Hzszelh
1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct
Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2005
Dërgo kërkesë
Telefon & Faks
+43 2236 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim

























