Qendër përpunuese
BIESSE ROVER A SMART 1632 5 axis

Name: BIESSE ROVER A SMART 1632 5 axis
Brand: BIESSE
Price: 84000 EUR
Availability: InStock

EXW VB plus TVSH

84 000 €

Viti i prodhimit

2017

Gjendje

I përdorur (plotësisht funksionale)

Vendndodhje

Київ

Qendër përpunuese BIESSE ROVER A SMART 1632 5 axis

Të dhëna bazë

Përshkrimi i makinës:: Qendër përpunuese

Prodhues:: BIESSE

Model:: ROVER A SMART 1632 5 axis

Numri i makinës:: 1000020374

Viti i prodhimit:: 2017

Gjendje:: i përdorur

Funksionalitet:: plotësisht funksionale

Orë pune:: 5 484 h

Çmimi & Vendndodhja

EXW VB plus TVSH

84 000 €

Vendndodhje:: Київ, Ukrainë

Detaje teknike

Magazinë mjetesh

Numri i vendeve në magazinën e veglave:

Detaje të fuqisë

Tensioni hyrës:

400 V

Frekuenca e hyrjes:

50 Hz

Lloji i rrymës hyrëse:

Rrymë e drejtpërdrejtë

Dokumentacion dhe çertifikim

Dokumentacion / manual Shenjëzimi CE

Specifikimet e boshtit

Distanca lëvizëse e boshtit X:

3 280 mm

Distanca e lëvizjes së boshtit Y:

1 660 mm

Distanca e lëvizjes së boshtit Z:

240 mm

Detaje të mëtejshme

Prodhuesi i kontrolluesve:

Biesse

Fuqi:

12,8 kW (17,40 HP)

Numri i boshtave:

Lloji i aktivizimit:

pneumatik

Detajet e ofertës

ID e shpalljes:: A22965242

Përditësim:: së fundmi më 16.10.2026

Përshkrim

We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner.

I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards.

Technical specifications of the machining center:
‣ Working areas *:
X = 3280 mm;
Y = 1580 to 1660 mm, depending on operating conditions.
Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules).
Z = 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules).
‣ Configuration 2
‣ 6 ATS tables – 18 carriages
‣ Rear row stops with 115 mm travel and 25 mm extension.
‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel.
‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system.
‣ Sensor to verify stop retraction.
‣ 4 support bars for H=74 mm modules.
‣ Claw-type vacuum pump with 250 m³/h capacity.
‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal.
‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins.
‣ Automatic lubrication system.
‣ Sawdust and chip removal conveyor.
‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled.
‣ Coolant supply unit.
‣ Additional Z-carriage for machining units, controlled by an independent Z-axis.
‣ BH 17 L drilling head.
‣ 16-position rotary tool magazine on the X-carriage.
‣ 12-position linear tool magazine mounted on the machine frame.
‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units.
‣ 300 mm diameter saw blade for integrated-flange mounting.
‣ bSolid software.

Lrodpfx Acjz R I U Iodeu

If the information above is insufficient, please contact me and let me know what you would like to know.
Upon request, I can provide a document in English with a detailed description of our machining center's layout.

Best regards, Ihor Balychev.