Qendër përpunimi - në dispozicion menjëherë -

Biesse Ausstellung - Rover Multi Up M C S

CNC machining centers Rover Multi Up M C S - exhibition model -

Work area *:
X = 3280 mm;
Y = from 1580 to 1660 mm, according to the working conditions
Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H=74 mm
Z = 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H=29 mm
Workpiece passage *: Y = 1900 mm
Axis travels *:
X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm
VACUUM SYSTEM
Division of the vacuum system into 2 work areas and 2 clamping areas in X.
AUXILIARY VACUUM SYSTEM - 2 areas
It enables the clamping of workpieces by means of vacuum templates.

Remote control RM850

Rover Multi Up M C S Panel - Multi Purpose Regular

Configuration 2
Compatible with the revolving tool magazine with 16 slots and the side tool magazine with 12 slots.
The tool magazines can also be retrofitted.

Uninterruptible power supply (UPS) for the machine PC.

6 ATS workpiece supports - 18 module carriers
— 6 aluminum workpiece supports. The guidance of the workpiece supports is on linear guides with
ball circulation slide blocks. The clamping is done on the front and rear linear guide by means of
pneumatic cylinders. The clamping is released by a push button, which is attached to the front of the workpiece support.
— 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping
The vacuum modules can be rotated by 15° on the module carriers; an ideal solution for molded parts.
— 18 closures for the module carriers without template.

Work table SA (Set-Up Assistant) for work tables up to 1550 mm.
Supported manual positioning system with direction of travel indicator and position indicator.
— Sensors on each work table and along the X axis of the work area.
— Display of the direction and position reached for the carriage in the positioning phase, mounted on each work table
The system, according to the programming of the work tables, suggests the direction of movement of each
work table and carriage to the operator and indicates the position reached with a green LED and a beep, with an error of +/- 1.5 mm.

Division of the pneumatic system into 2 work areas in X.

Machining unit with 5 interpolating axes 13 kWp (17.4 PS), with HSK F63 adapter, liquid-cooled - 20,000 RPM.

Extraction hood with 12 NC-controlled positions for the electrospindle with 5 axes.

Flange for the preparation of a machining unit with 5 interpolating axes for the mounting of aggregates.

Coolant system

Additional Z-axis support for rear machining units, with independent Z-axis.

Drilling head BH 24 L

Side tool magazine with 12 slots in the machine bed.

Revolving tool magazine with 16 slots, installed directly on the machining unit X.

Tool holder HSK F63, equipped with a long integrated flange, for saw blades on a 5-axis head.

Saw blade 300 mm, for tool holder.

Hi-Tech tool set
Complete set of tools for the acceptance test
Consisting of the following 9 parts

Replacement of the standard PC with a powerful PC.

Digital devices for measuring tool length with diameter up to 130 mm.

bSolid

NC-HOPS 8 MacroCAM Rover 1. AV
NC-HOPS MacroCAM 1. License
WorkCenter Suction proposal
5-axis simultaneous
Material removal simulation
Gedpfjy Ehrxsx Ab Nsui
12 months warranty period

Location: in stock 54634 Bitburg
- immediately available -

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.