Kamion për qëllime të veçanta

VOLVO FH500 6x4 Fassi F545RA 2.27 mit Jib und Winde

VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch

Liftable drive axle
Liftable axle
Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks.
Front axle load max. 10.0 t (technical)
Rear axle load max. 21 t (technical)
Volvo Dynamic Steering (VDS)
330 L aluminium tank right side
AdBlue tank usable capacity 64 litres
Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter
Electrical connection for trailer, 15-pin
Euro 6, level E – onboard diagnostics
Cabin colour signal white
Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side.
Front mirror
External sun visor
LED main headlights
Headlight cleaning system
Automatic switching between daytime running light and low beam
Automatic headlight leveling
Daytime running light LED, "V-light"
LED front fog lights
Static LED cornering light
Two LED revolving beacons (amber), mounted on cab roof front
Cable entry through cab roof both sides
Wiring for roof-mounted spotlights, max 280 W
2 air horns on the roof, controlled from the steering wheel
Roof antenna and preparation for CB radio
Roof bar for accessories, front
Factory-mounted emblems/type designation
Iedpfjx A Nntex Akzeba
Emission type plate (Euro...)
L-label (low noise vehicles -96)

Flatbed made of steel/welded construction, fixed-mounted, low profile
Length approx. 4800 mm, width approx. 2480 mm
Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left)
Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left)
Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning
6 stake pockets per side (3 each)
Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled
Robust front wall consisting of welded frame with recessed stake pockets
Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour
Tool boxes between rear axles fitted with chequer plate
5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour.
Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics.

F545RA.2.27 xe-dynamic » Base unit
Winch type V20, for double cable operation with folding sheave and accessories
Endless slewing range
All hydraulic cylinders double-acting
Piston rods hard-chromed
Double knuckle boom system with PROLINK (overbending up to 15°)
Electronic overload shutdown with FX500
FASSI stability control FSC-S/II including LMB II
Emergency stop and visual alarm (90% and 100%)
Pressure relief and load holding valves
XF (Extra Fast) + XP (Extra Power) systems
RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display
Danfoss D850 valve block with 4 control valves mounted on crane column
Emergency control for crane operation
High pressure filter supplied plumbed
Separate hydraulic tank (180 l) with filt

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.