Shtyp i nxehtëOtt
Shtyp i nxehtë
Ott
EXW VB plus TVSH
33 614 €
Gjendje
I përdorur
Vendndodhje
Castrop-Rauxel 

Të dhëna bazë
Çmimi & Vendndodhja
EXW VB plus TVSH
33 614 €
- Vendndodhje:
- Castrop-Rauxel, Gjermania

Telefononi
Detaje teknike
Dimensionet dhe pesha
Gjatësia totale:
3 000 mm
Gjerësia totale:
2 500 mm
Lartësia totale:
2 160 mm
Sistem hidraulik
Presioni i punës:
350 shufër
Detaje të fuqisë
Tensioni hyrës:
400 V
Frekuenca e hyrjes:
50 Hz
Rryma hyrëse:
50 A
Lloji i rrymës hyrëse:
tre fazë
Detajet e ofertës
- ID e shpalljes:
- A23346404
- Përditësim:
- së fundmi më 17.11.2026
Përshkrim
OTT Hot Press – Modernized Veneer Press, Converted for CFRP and Prepreg Manufacturing
For sale is a modernized OTT veneer press, which has been extensively converted into a high-performance hot press for CFRP manufacturing.
The press has been technically modernized and equipped with a new, PLC-controlled heating and temperature control system. It is particularly suitable for the processing of CFRP prepregs as well as for applications with heated aluminum dies.
Through freely programmable temperature profiles, multi-stage heating ramps, and additional measuring options for direct temperature monitoring in the workpiece, the system offers high flexibility for different manufacturing processes.
Another special feature is the additional controllable pneumatic system with an operating pressure of up to 30 bar. This allows an internal pressure to be built up in hollow-body components during the pressing process. This opens up additional possibilities in the production of complex CFRP components.
Technical data
- Manufacturer: OTT
- Machine type: Modernized veneer press / hot press
- Press area: 2,250 x 750 mm
- Total pressure: 100 tons
- Hydraulic pressure: 350 bar
- Hydraulics: 4 cylinders, each with a diameter of 100 mm
- Cylinders: Overhauled and newly sealed by a specialist company
- Control: Siemens PLC S7-1200 G2
- Maximum operating temperature: 180 °C
- Heating rate: up to 4 K/min
- Additional pneumatic system: Controllable, up to 30 bar operating pressure
Ijdps Aktifofx Ag Tjbd
Heating system and temperature control
The press features new, PLC-controlled heating plates from Busse.
Equipment:
- 4 heating elements in the heating plates (2 top, 2 bottom)
- 4 temperature sensors for monitoring the heating plates
- 8 PLC-controlled outputs for additional heating cartridges
- 8 slots for temperature sensors of the additional heating cartridges
- 2 additional sensors for direct temperature monitoring in the workpiece
Pneumatic system for hollow-body components
In addition, the press is equipped with a controllable pneumatic system that allows an operating pressure of up to 30 bar.
During the pressing process, a defined internal pressure can be applied to hollow-body components.
Particularly interesting for:
- Production of CFRP hollow-body components
- Processing of prepregs with internal pressurization
- Complex fiber composite structures
- Special forming processes in the composite field
Control and process control
The temperature control is carried out via a Siemens PLC S7-1200 G2.
The following process parameters can be individually set and programmed:
- Heating rate
- Multi-stage heating ramps
- Start temperature
- End temperature
- Holding temperature at the end of the cycle
- Pre-programming and storage of different program cycles
This allows different temperature profiles to be implemented for different materials and manufacturing processes.
Possible applications
The press has been specifically optimized for use in CFRP manufacturing.
Particularly suitable for:
- CFRP prepreg processing
- Production of fiber composite components
- Production of CFRP hollow-body components with internal pressurization
- Processing of prepregs in heated aluminum dies
- Trial and prototype manufacturing
- Other applications in the field of heated molding
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
For sale is a modernized OTT veneer press, which has been extensively converted into a high-performance hot press for CFRP manufacturing.
The press has been technically modernized and equipped with a new, PLC-controlled heating and temperature control system. It is particularly suitable for the processing of CFRP prepregs as well as for applications with heated aluminum dies.
Through freely programmable temperature profiles, multi-stage heating ramps, and additional measuring options for direct temperature monitoring in the workpiece, the system offers high flexibility for different manufacturing processes.
Another special feature is the additional controllable pneumatic system with an operating pressure of up to 30 bar. This allows an internal pressure to be built up in hollow-body components during the pressing process. This opens up additional possibilities in the production of complex CFRP components.
Technical data
- Manufacturer: OTT
- Machine type: Modernized veneer press / hot press
- Press area: 2,250 x 750 mm
- Total pressure: 100 tons
- Hydraulic pressure: 350 bar
- Hydraulics: 4 cylinders, each with a diameter of 100 mm
- Cylinders: Overhauled and newly sealed by a specialist company
- Control: Siemens PLC S7-1200 G2
- Maximum operating temperature: 180 °C
- Heating rate: up to 4 K/min
- Additional pneumatic system: Controllable, up to 30 bar operating pressure
Ijdps Aktifofx Ag Tjbd
Heating system and temperature control
The press features new, PLC-controlled heating plates from Busse.
Equipment:
- 4 heating elements in the heating plates (2 top, 2 bottom)
- 4 temperature sensors for monitoring the heating plates
- 8 PLC-controlled outputs for additional heating cartridges
- 8 slots for temperature sensors of the additional heating cartridges
- 2 additional sensors for direct temperature monitoring in the workpiece
Pneumatic system for hollow-body components
In addition, the press is equipped with a controllable pneumatic system that allows an operating pressure of up to 30 bar.
During the pressing process, a defined internal pressure can be applied to hollow-body components.
Particularly interesting for:
- Production of CFRP hollow-body components
- Processing of prepregs with internal pressurization
- Complex fiber composite structures
- Special forming processes in the composite field
Control and process control
The temperature control is carried out via a Siemens PLC S7-1200 G2.
The following process parameters can be individually set and programmed:
- Heating rate
- Multi-stage heating ramps
- Start temperature
- End temperature
- Holding temperature at the end of the cycle
- Pre-programming and storage of different program cycles
This allows different temperature profiles to be implemented for different materials and manufacturing processes.
Possible applications
The press has been specifically optimized for use in CFRP manufacturing.
Particularly suitable for:
- CFRP prepreg processing
- Production of fiber composite components
- Production of CFRP hollow-body components with internal pressurization
- Processing of prepregs in heated aluminum dies
- Trial and prototype manufacturing
- Other applications in the field of heated molding
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
Së fundi online: Dje
I regjistruar që nga: 2025
1 Njoftimi online
Dërgo kërkesë
Telefon & Faks
+49 1573 ... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Spatenhof
752 km
Makinë për veshjen e buzës
OttTornado FÜ + PU
OttTornado FÜ + PU
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Röllbach
1 281 km
Presë për fornir
OTTSTABIL 3013/135
OTTSTABIL 3013/135
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Sveti Jurij ob Ščavnici
689 km
Makinë për veshjen e buzës
OttPacific V6-F
OttPacific V6-F
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Wioska
1 264 km
Presë rimeso OTT JU 60-S
OttJunior JU 60 S
OttJunior JU 60 S
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Gerolzhofen
1 237 km
Makinë për veshjen e buzës
OTTKantomat K55
OTTKantomat K55
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Gerolzhofen
1 237 km
Makinë për lidhjen e skajeve
OttKantomat 156-FÜ
OttKantomat 156-FÜ
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Spatenhof
752 km
Makinë për veshjen e buzës
OttTornado TOP
OttTornado TOP
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Reichertshofen
1 076 km
Lëmuese me rrip të gjerë
OttOmega 1100
OttOmega 1100
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Gronau (Westfalen)
1 580 km
Makinë për veshjen e buzës
OttTopEdge DUO
OttTopEdge DUO
I suksesshëm
Mesazhi juaj u dërgua.
Njoftim i vogël
Michelstadt
1 285 km
Makinë për veshjen e buzës
OttTornado Top
OttTornado Top
Njoftimi juaj u fshi me sukses
Ndodhi një gabim






































































































