Mikser

Mercedes-Benz Arocs 3646 Arocs Modellgeneration 5 3546, 8x4 E...

- Adaptive cruise control
- Aluminum fuel tank
- Leaf spring suspension
- Differential lock
- Speed limiter
- Air conditioning
- Air-suspended seats
- Particle filter
- Rain sensor
- Rearview camera
- Sun visor
- Toolbox
- Power take-off (PTO)

Mercedes-Benz Arocs Model Generation 5 3546, 8x4 EURO 6e - EuromixMTP EM 10 L

NEW - without registration

Vehicle equipment:

Engine OM470, R6, 10.7 l, (459 hp), 1900 Nm, 2nd generation engine OM470
Engine type Euro VI, E
Wheelbase 4550 mm
Transmission G 230-12/11.7-0.78 Mercedes PowerShift 3
Rear axle, bevel gear 233, planetary, 13.4 t
Front axle 7.5 t
F18LHA 90 2x 315/80 R 22.5 Regio Goodyear EQMAX S
Axle ratio i = 4.333
Tank 320 l, left, 735 x 700 x 750 mm, aluminum
AdBlue tank 25 l
Disc brake, on front and rear axles
Electronic braking system with ABS and ASR
ABS, switchable
M-cab ClassicSpace, 2.30 m, tunnel 320 mm ClassicSpace
Light sensor - rain sensor
Instrument cluster, 12.7 cm
Rearview camera
Classic cockpit
Air conditioning
Cruise control
Traffic sign assistant Active Sideguard Assist 2
Frontguard Assist Active Brake Assist 6 Plus Attention Assist 2
Preparation for breathalyzer with immobilizer
ATS warranty according to general terms and conditions, 3 years/250,000 km

EUROMIX MTP - Concrete mixer body EM 10 L

Concrete mixer equipment

Model: EuromixMTP EM 10 L
Nominal volume 10 m³ ready-mix concrete
Mixing drum in lightweight design
Mixing drum in lightweight design made of HARDOX S450 material
Mixing blades in lightweight design made of HARDOX S500 material
Gearbox manufacturer ZF-P5300
Hydraulic pump manufacturer Bosch Rexroth
Hydraulic motor manufacturer Bosch Rexroth
Oil cooler system integrated, manufacturer ASA
Mixing control mechanical, start/stop electric
Compressed air water system
Water connection on the platform with hose line
Water filling line, one-sided with C-coupling
Mixing drum with one service flap
Ladder with platform
Rubber attachment on the filling hopper
Swiveling, single-arm discharge chute made of steel
Wear plates in filling hopper, discharge trough and swiveling chute
Drum locking for securing the drum during maintenance work
Polyurethane primer
Weight approx. 3,650 kg, deviations +/- 5%
with emergency stop function according to EU safety technology
Mudguards made of aluminum above the rear axles
2x extension chutes made of steel or plastic
Water system
Water tank 500l (compressed air)
Water tank steel
Shut-off valve mounted under the water tank in the filling line
Water connection "C" coupling
Operation & electrical system
Mixer control - mechanical at the rear
Gbedpfxjzfzhws Aqier
Start-stop system (with EDC)
Geometric volume 17361 L
Volume water tank 11121 L
Tank inclination 11.3
Length 7075 mm
Width 2300 mm
Height 2748 mm

Special equipment:

Extension chute plastic - steel - aluminum
Folding chute plastic (or steel)
Retaining flap swiveling chute
Plastic box
Dust box stainless steel
Admixture tank, non-pressurized
Admixture pressure tank
Trowel holder
¾ drum closure
Rearview camera
LED work lights

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.