Sistemi i montimit me shtypje

MDS Autoriv Handarbeitsplatz A220-PD

MDS
Type: MDS A220-PD
MDS A220-PD Autoriv manual workstation
Lodpfx Aotgik Regmshr
A220-PD assembly system is a stationary manual workstation for processing press-fit elements.
Intended use:
The machine is used to press in fasteners.
The worker inserts the corresponding screws, plastic nuts and the component to be
and the component to be processed into the machine by hand.
The operator then starts the pressing process using a foot switch.
The pressing process runs automatically.
Fasteners:
Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud
Thread size - M5, M6, M8, M10, M12
Technical data:
Control voltage 230V/10A
Connector plug HAN 10, not wired
Temperature ranges:
Transport: - 20°C to + 60°C
Operation: + 10°C to + 40°C
Storage: - 20°C to + 50°C
Compressed air connection:
Operating pressure: 6 bar
Quality: Conditioned, water-free and
and unlubricated air
Connection: 1⁄2" connection thread
Machine dimensions:
Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm
Values apply to a working height (AH) of 1000 mm.
Pneumatics:
Standard: Manufacturer SMC
Variant: Manufacturer FESTO
Control system:
Standard: Manufacturer B & R
Variant: Manufacturer Siemens
Machine type C-frame A220-PD
Continuous sound pressure level (LpA) 78 dB
Operating modes:
The operating modes can be changed in the control panel.
Automatic mode:
The fasteners are pressed in automatically.
Movements are only triggered when the operator presses the foot pedal
and triggers the pressing process.
Manual mode:
In manual mode, adjustments are made to the machine.
In this operating mode, movements can be activated individually.
Weight: Approx. 600 kg
Condition: Used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.