Makinë bluarëse xhamiINTERMAC
Master 45
Makinë bluarëse xhami
INTERMAC
Master 45
VB plus TVSH
19 900 €
Viti i prodhimit
2005
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Lubin 

Të dhëna për makinën
- Përshkrimi i makinës:
- Makinë bluarëse xhami
- Prodhues:
- INTERMAC
- Model:
- Master 45
- Viti i prodhimit:
- 2005
- Gjendje:
- shumë mirë (i përdorur)
- Funksionalitet:
- plotësisht funksionale
- Orë pune:
- 8 000 h
Çmimi & Vendndodhja
VB plus TVSH
19 900 €
- Vendndodhje:
- Lubin, Polonia

Telefononi
Detaje teknike
- Distanca lëvizëse e boshtit X:
- 4 120 mm
- Distanca e lëvizjes së boshtit Y:
- 2 310 mm
Detajet e ofertës
- ID e shpalljes:
- A21304457
- Përditësim:
- së fundmi më 26.06.2026
Përshkrim
For sale: Intermac Master 45 glass/stone processing machine, the largest unit ever produced.
The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet.
Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled.
Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry.
Technical specifications:
1. Working area: 4.12 × 2.31 meters
2. Software: ICam
3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs)
4. 3 reference starting points
5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used.
The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility.
Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed.
A VAT invoice will be issued. The listed price is NET.
Possible disassembly date: From 10/02/2026 onward.
Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased.
Preferred contact method: email.
Dwedpfxsymgfle Actea
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
The machine was manufactured in 2005, with approximately 8,000 operating hours (including only about 100 hours dedicated to stone processing). The company is offering this machine for sale due to relocation and modernization of its machinery fleet.
Condition: The machine is in very good condition—protected against corrosion and has undergone a comprehensive overhaul. Most hoses and lines have been replaced, all leaks sealed, filters changed, coolant and lubricants replaced, axis brakes changed, door wheel bearings and control unit fuse replaced, as well as air hoses and both suction and return hoses for the vacuum pump. Technical water pump hoses, clean water hoses, and filters have also been replaced. The radiator has been professionally cleaned, the lubrication system has been cleaned, and the coolant and lubricant tanks refilled.
Operational status: The machine is fully functional and ready for immediate use. Professional geodetic measurements (laser scanning, photogrammetry) were conducted to verify machine geometry.
Technical specifications:
1. Working area: 4.12 × 2.31 meters
2. Software: ICam
3. Suction cup set: 160 mm round (2 pcs), 120 mm (2 pcs), 90 mm (2 pcs)
4. 3 reference starting points
5. Stone-processing tools included: 5 ISO40 tool holders, 45 mm cutting mill, 20 mm diameter bit, “0” surfacing mill, set of 5 polishing pads, 35 mm hole saw, 120° lettering engraver—all tools are very lightly used.
The machine is currently assembled and operational. It is a well-maintained, rust-free unit in full working order (interested buyers can request videos of the machine in operation). Throughout its lifespan, the machine has been stored in a dry, heated industrial facility.
Buyer is responsible for disassembly and transportation. Disassembly services can be arranged upon prior agreement if needed.
A VAT invoice will be issued. The listed price is NET.
Possible disassembly date: From 10/02/2026 onward.
Additionally, a Renner 15 kW compressor with a 500-liter pressure buffer tank can be purchased.
Preferred contact method: email.
Dwedpfxsymgfle Actea
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2023
1 Njoftimi online
Dërgo kërkesë
Telefon & Faks
+48 535 4... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
Njoftim i vogël
Maarheeze
1 586 km
Vinç industrial për ambiente të mbyllura ± 11.550 mm x 5.000 kg
DemagEPKE
DemagEPKE
Njoftim i vogël
Szczecin
1 427 km
Sistem qepjeje vertikale për xhami
LiSECKSR-25 R-L
LiSECKSR-25 R-L
Njoftim i vogël
Maasmechelen
1 559 km
Makinë bluarëse xhami
LattuadaTL10 AV C
LattuadaTL10 AV C
Njoftim i vogël
Pleystein
1 120 km
Makinë bluarëse qelqi
BavelloniTB65
BavelloniTB65
Njoftim i vogël
Beesd
1 651 km
Vinç me krah
Abusoverhead crane 15.050 mm x 12,5 ton
Abusoverhead crane 15.050 mm x 12,5 ton
Njoftim i vogël
Birmingham
2 087 km
Makineri për drejtimin e skajeve
BavelloniStraight Line Edger VE500 11
BavelloniStraight Line Edger VE500 11
Njoftim i vogël
Władysławowo
1 449 km
Makinë printimi dixhitale
DIP TECHGlassJet NOVO
DIP TECHGlassJet NOVO
Njoftim i vogël
Pančevo
416 km
Djegës xhami
TamglassProE-2442-CTS-20
TamglassProE-2442-CTS-20
Njoftim i vogël
Szczecin
1 427 km
Printer dixhital për xhami
Dip-TechGlassJet AR6000
Dip-TechGlassJet AR6000
Njoftim i vogël
Velžys
1 648 km
Linjë prerjeje për xham të laminuar, 4600 mm
BOTTERO545 VSX-46 + 100 BLC-J
BOTTERO545 VSX-46 + 100 BLC-J
Njoftimi juaj u fshi me sukses
Ndodhi një gabim













































































































