Shtypës i sheshtë, stampim i nxehtë, multiGRAFOTRONIC
350 200254G
Shtypës i sheshtë, stampim i nxehtë, multi
GRAFOTRONIC
350 200254G
VB plus TVSH
67 500 €
Gjendje
I përdorur
Vendndodhje
Kruszyn Krajeński 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Shtypës i sheshtë, stampim i nxehtë, multi
- Prodhues:
- GRAFOTRONIC
- Model:
- 350 200254G
- Gjendje:
- shumë mirë (i përdorur)
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
VB plus TVSH
67 500 €
- Vendndodhje:
- Ceramiczna 15, 86-005 Białe Błota, PL

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A18949116
- Përditësim:
- së fundmi më 29.12.2025
Përshkrim
Segment I – Unwinder with stabilizing table
The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment.
In addition:
• The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working.
• Leading (pulling) servomotors ensure precise control of the material, also located in the station.
Segment II – Central (Die)
The heart of the machine is the flat die, allowing for cutting and embossing.
It has been equipped with:
• Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations.
• Upper foil unwinders enabling additional material processing.
• Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work.
• Lower trolley as an alternative to the hanging system – used depending on the specifics of the work.
Segment III – Puncher
The third segment is responsible for separating cut labels and transporting them to the receiving tray.
• Puncher – precise separation of single labels.
• Two laminators – one on each side of the puncher, with adjustable pressure.
Rcjdpfxjwck U Rs Agmsk
• Unwinders and winders ensuring smooth guidance of additional raw material.
Segment IV – Rewinder
The last segment is responsible for the final winding of the finished material.
Equipped with:
• Two mandrels – enabling simultaneous or alternate winding of the finished product.
• Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material.
• Slitting disc knife station.
• Whisk (waste) extraction system.
• Web sensors placed under each overhang, ensuring optimal process control.
Additional functionalities
• Remote control – the machine can be operated via the tablet included in the set.
• Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment.
In addition:
• The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working.
• Leading (pulling) servomotors ensure precise control of the material, also located in the station.
Segment II – Central (Die)
The heart of the machine is the flat die, allowing for cutting and embossing.
It has been equipped with:
• Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations.
• Upper foil unwinders enabling additional material processing.
• Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work.
• Lower trolley as an alternative to the hanging system – used depending on the specifics of the work.
Segment III – Puncher
The third segment is responsible for separating cut labels and transporting them to the receiving tray.
• Puncher – precise separation of single labels.
• Two laminators – one on each side of the puncher, with adjustable pressure.
Rcjdpfxjwck U Rs Agmsk
• Unwinders and winders ensuring smooth guidance of additional raw material.
Segment IV – Rewinder
The last segment is responsible for the final winding of the finished material.
Equipped with:
• Two mandrels – enabling simultaneous or alternate winding of the finished product.
• Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material.
• Slitting disc knife station.
• Whisk (waste) extraction system.
• Web sensors placed under each overhang, ensuring optimal process control.
Additional functionalities
• Remote control – the machine can be operated via the tablet included in the set.
• Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2020
Dërgo kërkesë
Telefon & Faks
+48 52 37... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
Njoftim i vogël
Sofia
313 km
Shtypshkronjë fleksografike
ArpecoImpressionist
ArpecoImpressionist
Njoftim i vogël
Heemskerk
1 721 km
Makina futëse NEOPOST FRANCOTYP
Francotyp-PostaliaFPI600 FPI2000 FPI 4530 FPI4730
Francotyp-PostaliaFPI600 FPI2000 FPI 4530 FPI4730
Njoftim i vogël
Emskirchen
1 190 km
Makinë futëse
Fracotyp-PostaliaFPi 4530
Fracotyp-PostaliaFPi 4530
Njoftim i vogël
Helmstedt
1 417 km
Trimmer me ushqyes anijes
Mueller Martini251+289
Mueller Martini251+289
Njoftim i vogël
Neuhausen
1 237 km
Makinë për përpunimin e etiketave
Grafisk Maskinfabrik330 FB-D hot foil + screen printing
Grafisk Maskinfabrik330 FB-D hot foil + screen printing
Njoftim i vogël
München
1 031 km
PITNEY BOWES DI425
Pitney BowesDI425
Pitney BowesDI425
Njoftim i vogël
Leinfelden-Echterdingen
1 205 km
Makineri Grafike FGT - Konvertim
GMFB 3300 - Hotfoil/Screen etc.
GMFB 3300 - Hotfoil/Screen etc.
Njoftim i vogël
Budaors
711 km
Fotokopjues me ngjyra A3
Konica MinoltaC558
Konica MinoltaC558
Njoftim i vogël
Bad Kreuznach
1 359 km
Makinë printimi fleksografike
SMO Sondermaschinenbau OscherslebenEDM 200
SMO Sondermaschinenbau OscherslebenEDM 200
Njoftim i vogël
Kaunas
1 557 km
Rewerer
Jurmet
Jurmet
Njoftimi juaj u fshi me sukses
Ndodhi një gabim







































































