Gjysem rimorkio me shtrat te sheshte & gomuarFLIEGL
SDS 390 Gardine Standard Ultralight Coil
Gjysem rimorkio me shtrat te sheshte & gomuar
FLIEGL
SDS 390 Gardine Standard Ultralight Coil
EXW çmim fiks plus TVSH
25 990 €
Viti i prodhimit
2021
Gjendje
I përdorur
Vendndodhje
Triptis 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Gjysem rimorkio me shtrat te sheshte & gomuar
- Prodhues:
- FLIEGL
- Numri i makinës:
- WFDFLT33902029406
- Viti i prodhimit:
- 2021
- Gjendje:
- gati i ri (i përdorur)
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
EXW çmim fiks plus TVSH
25 990 €
- Vendndodhje:
- Oberpöllnitzer Straße 8, 07819 Triptis, Deutschland

Telefononi
Detaje teknike
- Peshë bosh:
- 5 800 kg
- Peshë maksimale e ngarkesës:
- 29 200 kg
- Peshë totale:
- 35 000 kg
- Konfigurimi i boshteve:
- 3 boshte
- Regjistrimi i parë:
- 12/2021
- Gjatësia e hapësirës së ngarkesës:
- 13 650 mm
- Gjerësia e hapësirës së ngarkesës:
- 2 480 mm
- Lartësia e hapësirës së ngarkesës:
- 2 790 mm
- Pezullimi:
- ajër
- Përmasa e gomës:
- 385/65 R22.5"
- Ngjyrë:
- argjendi
Detajet e ofertës
- ID e shpalljes:
- A19083991
- Numri i referencës:
- 59340
- Përditësim:
- së fundmi më 06.05.2025
Përshkrim
The images are archived; the vehicle may still be in use!
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
Hedpfewhp A Dox Ad Tsfb
without lift axle
These images are archive images; the vehicle may still be in use!
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Semi-trailer chassis for freight forwarding
Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219,
2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping.
Axles + Suspension
SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension,
Hedpfewhp A Dox Ad Tsfb
without lift axle
These images are archive images; the vehicle may still be in use!
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Dërgo kërkesë
Telefon & Faks
+49 36482... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim








