Përkrahëse gjysmërimorkio me platformë të ulët

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader

Our entire vehicle inventory, including vehicles available for immediate and short-term delivery, can be found on our website.

Excerpt from the equipment list. Full equipment details available upon request.

Gooseneck:
* Gooseneck with front corners beveled at approx. 45° and rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Extendable loading platform:
* Extendable loading platform with rear bevel approx. 1,000 mm x 8°
* 6 pairs of outward-folding lashing rings (LC 5,000 daN)
* 3 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tie-down straps (LC 2,000 daN)
* Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles

Landing legs:
* JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t)

Tyres:
* Tyres 235/75 R 17.5 3PMSF

TPMS:
* TPMS tire pressure monitoring system according to ECE R 141
* Data transmission to the towing vehicle is via the standardized EBS interface in line with ISO 11992. For correct display, the towing vehicle must be able to receive and display this data.

Axles:
BPW axles and suspension, 2 rigid axles, 1 steered trailing axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock actuated via reverse gear and manually
* Air suspension with lifting and lowering valve
* Axle tool kit

Brake system:
* Brake system complies with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel construction:
* Steel construction made of high-strength fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Paintwork:
* Entire steel structure automatically blast-cleaned with turbine blasting after welding
* Second abrasive blasting with corundum for optimal adhesion of the coating system
* Final painting with two coats of 2K topcoat, single color in RAL 3002 Carmine Red according to the RAL 841GL system
* Rims in silver grey
* Rear section metallized and painted in RAL 9010 (pure white)
* Paint structure tested in salt spray test according to ISO 9227-NSS
* Cavity sealing with special wax

Electrical system:
Hfedpfx Asx H Hi Eoabjr
* Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* ASPÖCK UNIBOX at the front terminal strip with sockets 24N, 24S & 15-pin connector according to ISO. 24N ISO 1185, 24S ISO 3731
* 15-pin ISO 12098

Accessories included:
* 2-inch kingpin
* One galvanized steel front wall, approx. 400 mm high
* Spare wheel holder in front of the front wall
* Yellow-red air couplings on the galvanized front connection panel
* Mount at the rear of the gooseneck for aluminium loading ramps
* Galvanized folding support legs under the platform bevel
* On the gooseneck and rear panel, left and right, each with a holder for warning signs including socket
* Axle load gauge including load diagram
* On the gooseneck, plug-in aluminium side and rear walls, approx. 2,440 x 400 mm (L x H)
* The rear galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm)
* One galvanized toolbox integrated in the beveled gooseneck
* 3 pairs of WADER container locks in the load area for a 20' (30') or 40' container
* 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the out

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.