Gjysmë-rimorkio me platformë pune

ES-GE 3-Achs-Ballastauflieger

You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website.

Excerpt from the equipment. Full specification available on request.

Chassis:
* Welded construction made of high-quality steel profiles with punched cross members. Designed for high point loads.

Coupling System:
* 2-inch king pin (also compatible with 3.5-inch)

Rear Underrun Protection:
* EC-compliant, bolted version

Side Underrun Protection:
* EC-compliant

Landing Legs:
* Single-sided operated landing legs (approx. 50 t static load), only operable when the air suspension is fully lowered

Axles:
* 3 x 9 t air suspension axle units, SAF brand
* Disc brakes approx. 430 x 45 mm
* ABS
* Wheel connection: hub-centered, 10 bolt with ET 120
* Total air suspension lift approx. 200 mm, with approx. 140 mm raise and 60 mm lower
* Control via rotary slide valve with detent function

Axle Lift:
Ndjdpfxoxpbz So Ahzec
* First and last axle liftable with fully automatic, load-dependent control
* Start-assist via button in the driver’s cab (15-pin socket, PIN 12; cab button not included in delivery)

Brake System:
* Two-line air brake system, EC-compliant, with EBS and RSS, automatic load-dependent regulation
* Spring-actuated cylinders as parking brake
* Non-interchangeable coupling heads mounted on the front cross member; no connecting line to tractor; brand of our choice

Tyres:
* 6 units, 385/65 R22.5 160J on rims 11.75 x 22.5 ET 120

Mudguards:
* EC-compliant, complete PVC mudguards in front of and behind each axle unit

Load Securing:
* 6 pairs of foldable lashing rings, evenly distributed (lashing force approx. 8 t)
* Holes for lashing straps every approx. 500 mm in the outer frame
* Stake pockets for insertion stakes 80x50: - 5 pairs recessed in the outer frame, - 3 pairs recessed in the loading floor

Insertable Stakes:
* 10 pieces, galvanized pipe approx. 80 x 50 x 4 mm

Front Wall:
* Bolted corner stakes filled with aluminum hollow profiles, inside with a steel impact plate across the full width and height

Stake Magazine:
* Internal magazine for 20 insertable stakes on the front wall

Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame

Lighting System:
* EC-compliant, 24 volts with multi-chamber lights
* LED side marker lights
* LED front position lights (white)
* LED rear outline lights, license plate lights
* 1 x 15-pin and 2 x 7-pin plug sockets on the front cross member

Equipment:
* Two wheel chocks with holders
* ECE 70 warning plates
* 2 LED work lights on lamp bracket (activated by reverse gear)
* Holder for rotating beacon at the rear (including beacon)
* 2 fixed access ladders on the sides
* Steel toolbox in front of the front wall, approx. 400 mm high
* Smart board to switch the second ride height
* 2 LED work lights above the king pin, switchable
* 2 LED work lights at the height of the landing legs (activated by reverse gear)
* 2 LED work lights on the lamp bracket (activated by reverse gear)

Painting:
* Chassis and front wall sandblasted and finished with a high-quality coating
* Chassis: hot-dip galvanized + RAL 3002 carmine red
* Front wall: RAL 3002 carmine red
* Front wall corner stakes: hot-dip galvanized
* Hubs: KTL black
* Rims: silver
* Rear underrun protection: white (RAL 9010)
* Attachments: galvanized/KTL black
* Please note that due to the size of the chassis and the chosen coating process (hot-dip galvanizing), issues may arise...

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.