Gjysmë-rimorkio me platformë pune

ES-GE 3-Achs Sattelanhänger - Bordwände + CV

You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website.

Excerpt from the equipment. Complete equipment available upon request.

Chassis:
* Welded construction made of high-quality steel profiles with continuous profile cross members, designed for high point loads. Underride guard, width approx. 700 mm, outer frame as UNP profile, wear plate approx. 8 mm, goose neck height front approx. 130 mm

Fifth wheel coupling:
* 2-inch kingpin

Underrun protection:
* Bolted design, according to EC

Side impact protection:
* According to EC, made of aluminum profiles, anodized

Kingpin supports:
* 2 x 12 t kingpin supports with leveling foot and one-sided operation on the right side

Axles:
* 3 x 9 t air suspension axle, manufacturer SAF, disc brakes 22.5"
* Total stroke approx. 180 mm, raising and lowering device via rotary slide valve

Braking system:
* Two-circuit compressed air braking system according to EC with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, interlockable coupling heads permanently mounted on the front cross member, without connection line to the towing vehicle

Tires:
* 6 tires, 385/55 R22.5 160J on steel rim 11.75 X 22.5 ET 120, manufacturer of our choice
* Tire pressure monitoring system (TPMS) via CAN-bus system of the EBS

Fenders:
* According to EC

Spare wheel holder:
* None

Load securing:
Bsdjzhd Ncopfx Aizeli
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t
* 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t
* In the outer frame, holes approx. every 400-600 mm for attaching lashing straps

Front wall:
* Reinforced steel construction, fixed, approx. 1,400 mm high
* Interior lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor embedded in the outer frame with galvanized omega steel profiles

Lighting:
* According to EC, 24 volts, with multi-chamber lights, LED side marker lights, LED position lights white front, LED outline lights rear, license plate lights
* Lane-keeping lights LED
* 1x15- and 2x7-pole connector sockets on the front cross member

Equipment:
* Warning signs ECE 70
* Holder for rotating beacon, including rotating beacon
* Foldable and extendable access ladder at the rear right (without platform)
* 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles

Painting:
* Front wall: RAL 5010 azure blue
* Chassis: Hot-dip galvanized
* Outer frame: Hot-dip galvanized + RAL 5010 azure blue
* Crossbars: RAL 5010 azure blue
* Kingpin supports: Aluminum, anodized
* Underrun protection: white (RAL 9016 traffic white)
* Attachments: galvanized/KTL black
* Rims: silver

Accessories:
* First axle liftable, with fully automatic, load-dependent lift control
* 10 pairs of crossbar pockets in the outer frame, evenly distributed
* 4 rows of crossbar pockets transverse to the loading area
* 20 pieces of crossbars made of galvanized tube 80/50, total length approx. 1,200 mm
* Inside on the front wall, a magazine for 20 pieces of plug-in crossbars
* 5 x 25 mm side boards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable crossbars
* Side board magazine under the chassis left and right
* Sliding rails for side boards
* Container locks for 1 x 40" and 2 x 20" containers, flush at the rear
* Containe

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.