Gjysmë-rimorkio me platformë pune

ES-GE 2-Achs-Sattelanhänger, Zwangslenkung

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request.

Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads.

Fifth wheel coupling: Fifth wheel plate with 2-inch King Pin.

Rear underrun protection: Compliant with EC, bolted design.

Side underrun protection: Compliant with EC.
Fgsdez N Nw Hjpfx Ak Deh

Kingpin supports: 2 x 12 t kingpin supports with leveling foot and single-sided operation on the right side in the direction of travel.

Axles: 2x10 t air suspension axle unit, manufactured by BPW, with disc brake approx. 430x45 mm, wheel connection center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, of which approx. 110 mm lifting and approx. 70 mm lowering. Air suspension control via hand regulator with stop function.

Steering: 2nd axle mechanically forced steering.

Braking system: Dual-circuit compressed air braking system compliant with EC with EBS and RSS, automatic load-dependent control, spring brake cylinders as parking brake, interlock-protected coupling heads firmly mounted on the front crossmember, without connecting line to the towing vehicle. Manufactured by Wabco.

Tires: 4 tires, 385/65 R22.5 164 K on rim 11.75 X 22,5 ET 120.

Fenders: Compliant with EC, 1/4 PVC fender in front of and behind the axle unit.

E-rack holder: 1 double basket with mounting material for one E-rack with ET120.

Load securing: - 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). - 7 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). - A hole for lashing straps every approx. 500 mm in the outer frame.

Stake pockets: - 8 pairs of stake pockets in the outer frame, evenly distributed. - 4 rows of stake pockets transverse to the loading area.

Stakes: - 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. - Magazine for 20 stakes inside the front wall.

Front wall: Bolted corner posts filled with aluminum hollow profiles, lined on the inside with approx. 9 mm screen printing board (approx. 1,250 mm high).

Floor: Approx. 28 mm Z-hardwood floor recessed in the outer frame.

Lighting system: Compliant with EC, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connector on the front crossmember.

Equipment: - Wheel chock with holder, double. - Warning signs according to ECE 70. - Work lights on the lamp bracket (switched via reverse gear). - Holder for rotating beacon at the rear including rotating beacon. - 2 x PVC toolbox.

Painting: Chassis blasted, cleaned, and hot-dip galvanized with high quality according to the latest technology. Superstructure parts cleaned, primed, and hot-dip galvanized.

Chassis: Hot-dip galvanized + RAL, please specify.
Outer frame: Hot-dip galvanized + RAL, please specify.
Front wall: RAL, please specify.
Front wall trim: Hot-dip galvanized.
Hubs: KTL black.
Rims: Silver.
Rear underrun protection: White (RAL 9010).
Attached parts: Galvanized / KTL black.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.