Zeiss Contura Vast XT Gold makinë matëse me koordinata (CMM)Zeiss
CONTURA 9/18/8
Zeiss Contura Vast XT Gold makinë matëse me koordinata (CMM)
Zeiss
CONTURA 9/18/8
EXW Çmim fiks plus TVSH
110 000 €
Viti i prodhimit
2020
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Budapest 

Të dhëna për makinën
- Përshkrimi i makinës:
- Zeiss Contura Vast XT Gold makinë matëse me koordinata (CMM)
- Prodhues:
- Zeiss
- Model:
- CONTURA 9/18/8
- Viti i prodhimit:
- 2020
- Gjendje:
- shumë mirë (i përdorur)
- Funksionalitet:
- plotësisht funksionale
- Orë pune:
- 12 500 h
Çmimi & Vendndodhja
EXW Çmim fiks plus TVSH
110 000 €
- Vendndodhje:
- Budapest, Hungaria

Telefononi
Detaje teknike
- Distanca lëvizëse e boshtit X:
- 900 mm
- Distanca e lëvizjes së boshtit Y:
- 1 800 mm
- Distanca e lëvizjes së boshtit Z:
- 800 mm
- Tensioni hyrës:
- 230 V
- Viti i fundit i remontit të përgjithshëm:
- 2025
- Pajisje:
- dokumentacion / manual
Detajet e ofertës
- ID e shpalljes:
- A22566042
- Përditësim:
- së fundmi më 17.08.2026
Përshkrim
We are offering the following: a Zeiss CONTURA 9/18/8 Vast XT Gold CMM in very good condition, manufactured in 2020.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
Ibodpfozuzf Iox Aa Dja
If you have any questions or need further information, please send us a message or call us.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Type: CMM CONTURA 9/18/8
Year of manufacture: 2020
Operating voltage: 100–240 V
Frequency: 50–60 Hz
We are selling our ZEISS Industrial Quality Solutions Contura 9/18/8 CMM, installed in 2020. It has been housed in a climate-controlled measuring room since day one.
The data, taken directly from Zeiss's service log (as of June 2025):
- 10,284 operating hours
- 169.9 km traveled by the axes combined (X: 49.5 km, Y: 80.4 km, Z: 40.1 km)
- Approximately 2,000 hours per year, consistently, with the same steady pace – no last-minute overtime before we listed it
- Zero significant component replacements
- Relocated, serviced, and recalibrated in June 2025 – all results within tolerance, no laser correction needed
One honest point, because we don't deal in exaggerated claims: the controller logged a few probe collisions over the years, some at higher speeds. However, probe performance was still good and passed the 2025 calibration without issue. We're mentioning this now so you won't find it in the log later and wonder why we didn't disclose it.
Probe head: VAST XT Gold
Software: Calypso CNC 7.2 + QS-Stat-out
Included accessories: PC, monitors, sensor rack
Other accessories (stylii from GOEKELER Messtechnik GmbH, fixturing elements from dk FIXIERSYSTEME GmbH & Co. KG) are available upon request (we have a large supply, please inquire), and you can also take the compressor (from Atlas Copco) and other accessories.
Price: €110,000 net (packed by Zeiss (with the original transport frame and pallet) and loaded onto your truck at our office in Budapest, Hungary)
It has measured everything from a few millimeters to 2 meters and has never failed us; it is still in daily use.
Ibodpfozuzf Iox Aa Dja
If you have any questions or need further information, please send us a message or call us.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
Së fundi online: Dje
I regjistruar që nga: 2023
1 Njoftimi online
Dërgo kërkesë
Telefon & Faks
+36 20 41... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim










