Grirëse - gërshërë rrotullueseVon der Mehden GmbH
Rewowi 990NZ Quad
Grirëse - gërshërë rrotulluese
Von der Mehden GmbH
Rewowi 990NZ Quad
FCA VB plus TVSH
59 000 €
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Innsbruck-Land 

Të dhëna bazë
- Përshkrimi i makinës:
- Grirëse - gërshërë rrotulluese
- Prodhues:
- Von der Mehden GmbH
- Model:
- Rewowi 990NZ Quad
- Gjendje:
- gati për përdorim (i përdorur)
- Funksionalitet:
- plotësisht funksionale
- Orë pune:
- 2 000 h
Çmimi & Vendndodhja
FCA VB plus TVSH
59 000 €
- Vendndodhje:
- Innsbruck-Land, Austri

Telefononi
Detaje teknike
Dimensionet dhe pesha
Peshë totale:
4 500 kg
Detaje të fuqisë
Tensioni hyrës:
400 V
Lloji i rrymës hyrëse:
tre fazë
Detaje të mëtejshme
Gjatësia e rotorit:
1 000 mm
Gjerësia e rotorit:
990 mm
Detajet e ofertës
- ID e shpalljes:
- A23349086
- Përditësim:
- së fundmi më 19.11.2026
Përshkrim
The Quad 990 from Von der Mehden GmbH is a slow-speed, four-shaft shredder specifically designed for continuous industrial operation in data privacy-compliant document destruction.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
Itjdpfx Afo Akv I Tsrep
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Technical data at a glance:
• Drive power: 75 kW
• Drive type: Electric direct drive (no hydraulic drive)
• Number of knife shafts: 4 shafts
• Screen basket: 32 mm; knife width: 14 mm
• Speed of main shafts: 5 – 35 RPM
• Cutting unit opening: 990 x 1000 mm
• Weight: 4,400 kg
• CE certificate
Design and operating principle:
• Four-shaft technology. The four knife shafts operate at a slow speed and with high torque to continuously convey the material towards the center of the cutting unit. Pieces of material that are too large are automatically fed back to the main cutting shafts via the secondary shafts.
• Perforated screen system. An integrated perforated screen defines the exact particle size of the discharge material.
• Armored cutting unit. The cutting knives consist of an impact-resistant core with a special, repeatedly renewable edge armor made of highly alloyed tool steel. In addition, the knife shaft assemblies are axially preloaded hydraulically, which significantly increases their resistance to bending.
• Maintenance-friendly design. The drives are spatially isolated from the cutting chamber, so dust and cutting debris cannot get into the oil seals. If necessary, the complete knife shaft assemblies, including the bearings, can be removed upwards and replaced independently of the drive.
Itjdpfx Afo Akv I Tsrep
• Control. An integrated PLC control system with reversing and shut-off automation protects the machine from overload.
Scope of supply:
• Quad 990 without base frame
• Control cabinet with control and frequency inverter
The stated operating hours are an estimate.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
Së fundmi online: javën e kaluar
I regjistruar që nga: 2026
1 Njoftimi online
Dërgo kërkesë
Telefon & Faks
+49+43660... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim












