Sistem për prodhimin dixhital të libraveTECNAU
LIBRA 800
Sistem për prodhimin dixhital të librave
TECNAU
LIBRA 800
Viti i prodhimit
2017
Gjendje
I përdorur
Vendndodhje
Europa 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Sistem për prodhimin dixhital të librave
- Prodhues:
- TECNAU
- Model:
- LIBRA 800
- Viti i prodhimit:
- 2017
- Gjendje:
- shumë mirë (i përdorur)
Çmimi & Vendndodhja
- Vendndodhje:
- Europa

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A21287107
- Numri i referencës:
- 40001.26
- Përditësim:
- së fundmi më 27.02.2026
Përshkrim
HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800
Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers.
Performance: from print run 1; up to 800 copies per hour
Book Format: min. 100 x 125 mm / max. A4
Thickness: min. 2 mm / max. 60 mm
Equipment / Further Details:
Line Configuration:
1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing.
Nwsdpfx Ajylyhdjb Aec
2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed.
3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder.
4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing.
5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block.
6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). We are happy to assist with this.
7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types.
8.System Control Software
Finishing Line
The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control:
• Information on book dimensions and inserts (quantity and sequence)
• Binder setup (spine position, thickness, and length)
• Cover preparation: Softcover → creasing, cutting, edge trimming
• Correct book-to-cover matching
• Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)
Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers.
Performance: from print run 1; up to 800 copies per hour
Book Format: min. 100 x 125 mm / max. A4
Thickness: min. 2 mm / max. 60 mm
Equipment / Further Details:
Line Configuration:
1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing.
Nwsdpfx Ajylyhdjb Aec
2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed.
3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder.
4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing.
5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block.
6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). We are happy to assist with this.
7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types.
8.System Control Software
Finishing Line
The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control:
• Information on book dimensions and inserts (quantity and sequence)
• Binder setup (spine position, thickness, and length)
• Cover preparation: Softcover → creasing, cutting, edge trimming
• Correct book-to-cover matching
• Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2006
Dërgo kërkesë
Telefon & Faks
+41 71 54... njoftime
Këto njoftime mund t'ju interesojnë edhe ju.
Njoftim i vogël
Leinfelden-Echterdingen
1 205 km
Makineri Grafike FGT - Konvertim
GMFB 3300 - Hotfoil/Screen etc.
GMFB 3300 - Hotfoil/Screen etc.
Njoftim i vogël
Langenfeld (Rheinland)
1 502 km
Makinë printimi dixhitale
XeroxiGen 5 Press incl. 5th colour
XeroxiGen 5 Press incl. 5th colour
Njoftim i vogël
Volkach
1 239 km
Horizon HT-30 | 2005 | 1,65 mln
HorizonHT-30
HorizonHT-30
Njoftim i vogël
Borken
1 562 km
Linja laminating qelqi me 2 ngrohje
Tool-TempHVD-G02
Tool-TempHVD-G02
Njoftim i vogël
Gjermania
1 340 km
Sistemi i laminimit
AutobondMini 105 THS
AutobondMini 105 THS
Njoftim i vogël
Leinfelden-Echterdingen
1 205 km
Makineri Grafike FGT - Konvertim
GMDC 330 - Age: 2016!
GMDC 330 - Age: 2016!
Njoftim i vogël
Dettelbach
1 240 km
Makineri tkurrëse (saldues këndor + tunel)
SmipackWS 560 A + T 450
SmipackWS 560 A + T 450
Njoftim i vogël
파주시
8 518 km
Lidhëse perfekte (Perfect Binder)
HorizonBQ-270
HorizonBQ-270
Njoftim i vogël
Leinfelden-Echterdingen
1 205 km
Makineri Grafike FGT - Label Press
MPSEF 410
MPSEF 410
Njoftim i vogël
Wakefield
2 131 km
Lidhëse e plotë (makinë për lidhje me ngjitje)
HorizonBQ-270 EVA
HorizonBQ-270 EVA
Njoftimi juaj u fshi me sukses
Ndodhi një gabim









































































