Makinë për testimin e rezonancës

SincoTec Power Swingly 20 kN EXCITING MOT

SincoTec
Type: Exciting Mot
Resonance testing system POWER SWINGLY 20 kN
The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker.
It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor.
The oscillating head is located in the upper part of the machine and generates the dynamic amplitude.
The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally.
The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive.
The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam.
The EXCITING MOT control system controls the testing system.
The complete control electronics for the control system are housed in an industrial PC cabinet.
Fsdpfx Aozii Awsqcjpi
The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529.
Technical data:
General data of the testing system:
Overall height of the testing system 1840 to 2240 mm
Height of the machine table 1030 mm
Width of the testing system 800 mm
Depth of the testing system 1500 mm
Height of the test chamber max. 600 mm (without force sensor)
Free column passage 550 mm
Maximum force amplitude 10000 N
Maximum total force ±20000 N
Maximum stroke ±5 mm
Test frequency 30 to 110 Hz
Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3)
Weight of the testing system approx. 1880 kg
Max. weight of the clamping device 150 kg
General data of the control cabinet:
Overall height of the control cabinet 1900 mm
Height of the table top 1080 mm
Width of the control cabinet 650 mm
Depth of the control cabinet 700 mm
Weight of the control cabinet 152 kg
Color RAL 9006 (white aluminum), table top Midnight
Conditions for the installation site:
Space requirement 2.5 x 2.5 m
Required ceiling height 2.8 m
Floor load-bearing capacity 170 N/cm²
Voltage supply 400 V / 50 Hz (clockwise rotating field)
Connection plug CEE socket, s-pole, 16 A
Fuse 16 A
Connection and environmental conditions
Mains conditions:
Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field
Voltage fluctuations < ± 10%
Short-time voltage dips < 20 ms
Limits for permanent disturbances Radio interference level A according to VDE0871
Frequency 50 Hz ± 1%
Protective earth Grounding resistance < 0.3 Ω
Model: POWER SWINGLY MOT
Condition: used
Scope of delivery: (See picture)
(Changes and errors in the technical data are subject to change!)
We will be happy to answer any further questions you may have by phone.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.