Makinë mbyllëse për tapa me fileto/tapa me goditjeR. Deckert
AVR 200
Makinë mbyllëse për tapa me fileto/tapa me goditje
R. Deckert
AVR 200
Viti i prodhimit
2017
Gjendje
I përdorur
Vendndodhje
Kreuzau 

Të dhëna bazë
- Përshkrimi i makinës:
- Makinë mbyllëse për tapa me fileto/tapa me goditje
- Prodhues:
- R. Deckert
- Model:
- AVR 200
- Viti i prodhimit:
- 2017
- Gjendje:
- shumë mirë (i përdorur)
Çmimi & Vendndodhja
- Vendndodhje:
- Schäfersgraben 15, 52372 Kreuzau, Deutschland

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A23342954
- Numri i referencës:
- 17431
- Përditësim:
- së fundmi më 16.11.2026
Përshkrim
Deckert AVR 200
Hedpj Akn Nmsfx Ag Tsnw
Dropper inserter and cap closer / tamper-evident caps + induction sealing
This machine, which operates in a pulsed manner and has a linear design, is designed for sealing containers with a dropper inserter and a subsequent cap closer. The manufacturer specifies a maximum output of 120 containers per minute.
The filled containers are fed directly from the left into the working area via a conveyor belt, which is also part of the capping machine.
In principle, this machine – with the appropriate tooling – can handle the following range of container sizes:
Container diameter: 30 to 90 mm
Container height: 40 to 210 mm
Cap diameter: up to 90 mm
The filled containers are singulated using a conveyor system, brought to the correct spacing, and fed to the dropper insertion station. A sensor detects the position of the container and releases the subsequent steps. Two containers are processed simultaneously.
The droppers are fed via a two-lane sorting belt and a linear conveyor. The upright droppers are picked up by a transfer device using vacuum, positioned above the container, and inserted. Subsequently, the containers are passed by a sensor that registers the presence of the dropper and signals the next station to prepare a screw cap. If there is a misdetection, the container is rejected to a reject chute.
The containers and caps are transported and fed in a single lane via a sorting belt and a cap belt to a cap carousel. The screw caps to be processed are picked up in pairs by vacuum heads, lowered onto the containers, and pre-tightened. The pre-tightening station consists of 4 vacuum screw heads (2 operate simultaneously) and 4 container centering devices. A sensor checks the presence of the cap; if there is a misdetection, the container is rejected to a reject chute.
In the final tightening station, two downstream screw heads tighten the caps with a specified torque.
A pressing station also enables the processing of press-on closures, and a measuring cup attachment station allows the application of an additional measuring cup cap.
The finished containers are discharged from the conveyor system onto the conveyor belt and to the right, out of the machine.
The capping machine is controlled via a separate touch screen control panel on the left side of the machine front. The entire working area is securely enclosed with glass doors.
The delivery scope of the line includes various formats for:
Round bottles from 20 ml = Ø 28.8 mm to 100 ml = Ø 46.5 mm
Shaped bottles from 50 ml = 47 x 25 x 85 to 500 ml = 82 x 50 x 215 mm
Droppers Ø 16/11.5 mm x 27 mm
as well as
Screw caps from Ø 21 mm to 46 mm.
In addition,
measuring cups or overcaps Ø 27 x 25 mm or Ø 29.2 x 25 mm have been used on the machine.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Hedpj Akn Nmsfx Ag Tsnw
Dropper inserter and cap closer / tamper-evident caps + induction sealing
This machine, which operates in a pulsed manner and has a linear design, is designed for sealing containers with a dropper inserter and a subsequent cap closer. The manufacturer specifies a maximum output of 120 containers per minute.
The filled containers are fed directly from the left into the working area via a conveyor belt, which is also part of the capping machine.
In principle, this machine – with the appropriate tooling – can handle the following range of container sizes:
Container diameter: 30 to 90 mm
Container height: 40 to 210 mm
Cap diameter: up to 90 mm
The filled containers are singulated using a conveyor system, brought to the correct spacing, and fed to the dropper insertion station. A sensor detects the position of the container and releases the subsequent steps. Two containers are processed simultaneously.
The droppers are fed via a two-lane sorting belt and a linear conveyor. The upright droppers are picked up by a transfer device using vacuum, positioned above the container, and inserted. Subsequently, the containers are passed by a sensor that registers the presence of the dropper and signals the next station to prepare a screw cap. If there is a misdetection, the container is rejected to a reject chute.
The containers and caps are transported and fed in a single lane via a sorting belt and a cap belt to a cap carousel. The screw caps to be processed are picked up in pairs by vacuum heads, lowered onto the containers, and pre-tightened. The pre-tightening station consists of 4 vacuum screw heads (2 operate simultaneously) and 4 container centering devices. A sensor checks the presence of the cap; if there is a misdetection, the container is rejected to a reject chute.
In the final tightening station, two downstream screw heads tighten the caps with a specified torque.
A pressing station also enables the processing of press-on closures, and a measuring cup attachment station allows the application of an additional measuring cup cap.
The finished containers are discharged from the conveyor system onto the conveyor belt and to the right, out of the machine.
The capping machine is controlled via a separate touch screen control panel on the left side of the machine front. The entire working area is securely enclosed with glass doors.
The delivery scope of the line includes various formats for:
Round bottles from 20 ml = Ø 28.8 mm to 100 ml = Ø 46.5 mm
Shaped bottles from 50 ml = 47 x 25 x 85 to 500 ml = 82 x 50 x 215 mm
Droppers Ø 16/11.5 mm x 27 mm
as well as
Screw caps from Ø 21 mm to 46 mm.
In addition,
measuring cups or overcaps Ø 27 x 25 mm or Ø 29.2 x 25 mm have been used on the machine.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2022
30 Njoftime online
Dërgo kërkesë
Telefon & Faks
+49 2421 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim


















