Makinë mulchingMcConnel
        Robocut T500    
 Makinë mulching
McConnel
        Robocut T500    
                                                    EXW VB plus TVSH                                            
                                            55 500 €                                    
                viti i prodhimit            
                2025            
            Gjendje        
            I ri                    
            Vendndodhje        
                                                Echt                                            

 Fotot tregojnë            
 Shfaq hartën            
Të dhëna për makinën
- Përshkrimi i makinës:
- Makinë mulching
- Prodhues:
- McConnel
- Model:
- Robocut T500
- Viti i prodhimit:
- 2025
- Gjendje:
- i ri
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
                            EXW VB plus TVSH                    
                            55 500 €                    
- Vendndodhje:
-             Galvaniweg 10, 6101 XH Echt, NL                 
 Telefononi            
Detaje teknike
- Shpejtësia maksimale:
- 7 km/h
- Ngjyrë:
- e verdhë
- Peshë totale:
- 1 500 kg
- Pajisje:
- kompjuter në bord, ndriçim
Detajet e ofertës
- ID e shpalljes:
- A17711568
- Përditësim:
- së fundmi më 06.10.2025
Përshkrim
        McCONNEL ROBOCUT T500
DEMONSTRATION UNIT
- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
Rcodpfou Rurusx Adnoh
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
DEMONSTRATION UNIT
- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
Rcodpfou Rurusx Adnoh
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Dokumente
Ofrues
            Shënim:        Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.    
I regjistruar që nga: 2020
Dërgo kërkesë
Telefon & Faks
                            +31 475 2... njoftime                
            Njoftimi juaj u fshi me sukses            
            Ndodhi një gabim            
















