Set me 8 kapëse shtrënguese të shpejta Lenzkes K16 (K-Line)Lenzkes
K16 Quick Mold Clamp (K-Line)
Set me 8 kapëse shtrënguese të shpejta Lenzkes K16 (K-Line)
Lenzkes
K16 Quick Mold Clamp (K-Line)
Gjendje
I përdorur
Vendndodhje
Trenčianske Stankovce 

Të dhëna bazë
- Përshkrimi i makinës:
- Set me 8 kapëse shtrënguese të shpejta Lenzkes K16 (K-Line)
- Prodhues:
- Lenzkes
- Gjendje:
- shumë mirë (i përdorur)
Çmimi & Vendndodhja
- Vendndodhja e shitësit:
- 3011 Sedličná, 913 11 Trenčianske Stankovce, Sllovaki

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A23339780
- Numri i referencës:
- 260372
- Përditësim:
- së fundmi më 16.11.2026
Përshkrim
Set of 8x Lenzkes K16 Quick Mold Clamp (K-Line)
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
Ijdpfx Aj Akk Efecdjii
9. Application: clamping injection molds onto injection molding machine platens
These are mechanical mold clamps (quick-release clamps) by LENZKES ,
series 100-16K (with T-slot nut), designed for injection molding machines.
There are 8 pieces in total shown in the photos.
Technical Parameters (Lenzkes 100-16K)
1. Manufacturer: Lenzkes Spanntechnik GmbH (Germany)
2. Model / Type: 100-16K (casting markings on both the body and bottom T-nut: 100-16K / K16)
3. Quantity in photos: 8 pcs
4. Bolt thread: M16 (strength class 12.9, internal hexagon socket)
5. T-slot width: 16 mm (per the 16K designation – T-slot nut with self-aligning swivel joint)
6. Maximum clamping force: 45 kN (approx. 4.5 tons per clamp)
7. Tightening torque: 150 Nm
8. Clamping height: steplessly adjustable (typically 0 – 45 mm without the need for shims/packing)
Ijdpfx Aj Akk Efecdjii
9. Application: clamping injection molds onto injection molding machine platens
Njoftimi juaj u fshi me sukses
Ndodhi një gabim

















