Tavolina e testimit të gjeneratorit të gjeneratorit me rrip 48VKübrich
Komponentenprüfstand
Tavolina e testimit të gjeneratorit të gjeneratorit me rrip 48V
Kübrich
Komponentenprüfstand
Gjendje
I përdorur
Vendndodhje
Borken 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Tavolina e testimit të gjeneratorit të gjeneratorit me rrip 48V
- Prodhues:
- Kübrich
- Model:
- Komponentenprüfstand
- Gjendje:
- shumë mirë (i përdorur)
Çmimi & Vendndodhja
- Vendndodhje:
- Einsteinstraße 8a, 46325 Borken, DE

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A17123082
- Numri i referencës:
- 24317
- Përditësim:
- së fundmi më 15.11.2024
Përshkrim
Kübrich
Kübrich test systems 48V belt starter generator - component test bench
Details of the test stand: (see Fig. 13)
Frame with
(1) Mounting device for a belt starter generator
(2) Load machine
(3) Belt
(4) MP1: Switch cabinet
(5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O
(6) MP2: Switch cabinet with Simotion
(7) MP4: Switch cabinet with DC-DC converter
(8) H3: Measurement technology box
(9) H4: Transfer box
Intended use:
The test stand is used to carry out tests on belt starter generators during development.
Technical data:
Electrical connection data
Power supply: 400 V / 32 A
Battery simulation: 0 - 60 V
Current: 0 - 250 A (continuous)
Current intensity: 330 A (short term, less than 1 s)
Control voltage 24 V
Mechanical performance data according to the data sheet of the load machine
A transmission ratio of 1:2 to the test specimen shaft must be observed.
Speeds:
Bsdpfx Afjumv Emj Ssww
Load machine:
Set-up mode: 0 - 50 1/min
Automatic mode: 0 - 10 000 1/min
Test specimen motor:
Set-up mode: 0 - 100 1/min
Automatic mode: 0 - 20 000 1/min
Dimensions and weight
Width: 850 mm Height: 1386 mm Length: 1687 mm
Weight: approx. 1.2 t
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Kübrich test systems 48V belt starter generator - component test bench
Details of the test stand: (see Fig. 13)
Frame with
(1) Mounting device for a belt starter generator
(2) Load machine
(3) Belt
(4) MP1: Switch cabinet
(5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O
(6) MP2: Switch cabinet with Simotion
(7) MP4: Switch cabinet with DC-DC converter
(8) H3: Measurement technology box
(9) H4: Transfer box
Intended use:
The test stand is used to carry out tests on belt starter generators during development.
Technical data:
Electrical connection data
Power supply: 400 V / 32 A
Battery simulation: 0 - 60 V
Current: 0 - 250 A (continuous)
Current intensity: 330 A (short term, less than 1 s)
Control voltage 24 V
Mechanical performance data according to the data sheet of the load machine
A transmission ratio of 1:2 to the test specimen shaft must be observed.
Speeds:
Bsdpfx Afjumv Emj Ssww
Load machine:
Set-up mode: 0 - 50 1/min
Automatic mode: 0 - 10 000 1/min
Test specimen motor:
Set-up mode: 0 - 100 1/min
Automatic mode: 0 - 20 000 1/min
Dimensions and weight
Width: 850 mm Height: 1386 mm Length: 1687 mm
Weight: approx. 1.2 t
Condition: used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!)
We will be happy to answer any further questions you may have on the phone.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2012
Dërgo kërkesë
Telefon & Faks
+49 2861 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim





























