Pajisje për lëmimin me magnet ERGOMAGForplan
PM 3000
Pajisje për lëmimin me magnet ERGOMAG
Forplan
PM 3000
Viti i prodhimit
2023
Gjendje
I përdorur
(plotësisht funksionale)
Vendndodhje
Pforzheim 

Të dhëna bazë
- Përshkrimi i makinës:
- Pajisje për lëmimin me magnet ERGOMAG
- Prodhues:
- Forplan
- Model:
- PM 3000
- Numri i makinës:
- 18439
- Viti i prodhimit:
- 2023
- Gjendje:
- i përdorur
- Funksionalitet:
- plotësisht funksionale
Çmimi & Vendndodhja
- Vendndodhje:
- Hanauer Straße 5-7, 75181 Pforzheim, Deutschland

Telefononi
Detaje teknike
Dimensionet dhe pesha
Peshë totale:
220 kg
Gjatësia totale:
875 mm
Gjerësia totale:
1 010 mm
Lartësia totale:
1 610 mm
Detaje të fuqisë
Tensioni hyrës:
230 V
Lloji i rrymës hyrëse:
tre fazë
Karakteristika sigurie
Ndalim emergjent
Dokumentacion dhe çertifikim
Dokumentacion / manual
Detajet e ofertës
- ID e shpalljes:
- A23342666
- Përditësim:
- së fundmi më 16.11.2026
Përshkrim
Forplan Ergomag PM 3000 with ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, and centrifugal dryer, type 270, year of manufacture 2023.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
Hedj Aknwmopfx Ab Njfp
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
The Ergomag PM 3000 is used for removing burrs, edges, splinters, and fiber protrusions from workpieces. The process is based on the gentle movement of magnetizable stainless steel pins (cylindrical pins), which are precisely guided by a high-frequency, rotating magnetic field. This enables effective and at the same time material-friendly processing of the component surfaces.
The movement of the stainless steel pins ensures, in particular, the deburring of hard-to-reach areas such as holes, undercuts, and small internal contours. Processing marks from turning, milling, or other machining processes are reliably removed. The result is a homogeneous surface structure, which often eliminates the need for subsequent processing or deburring steps.
The system features a four-bowl assembly made of wear-resistant polyurethane with ergonomic handles for easy removal of the containers. The machine equipment also includes a machine frame, an electrical unit, a motor unit, and a circulation pump. The electrical unit consists of a control cabinet with an integrated operating terminal, which is used to set the relevant process parameters, such as the rotational speed of the magnetic plate and the processing time. The motor unit generates the movement of the magnetic field required for the processing process.
To complement the manufacturing process, an ultrasonic cleaning bath, type UPE 25 DGL, year of manufacture 2023, is integrated into the workflow. The ultrasonic cleaning bath is used for thorough cleaning of the workpieces after the deburring process and reliably removes adhering particles, machining residues, and process media from hard-to-reach areas.
In addition, a centrifugal dryer, type 270, is available. The centrifugal dryer is used after the cleaning process and ensures fast and gentle drying of the workpieces. This removes residual moisture and water residues.
Hedj Aknwmopfx Ab Njfp
The combination of magnetic deburring, ultrasonic cleaning, and centrifugal drying creates a continuous process for processing, cleaning, and drying the workpieces. This reduces transport distances, minimizes manual handling steps, and ensures reproducible process quality.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
Së fundmi online: Sot
I regjistruar që nga: 2026
2 Njoftime online
Dërgo kërkesë
Telefon & Faks
+49 7231 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim














