Sistem laser sinterimi për plastikë

EOS Auspackstadtion P110

We are offering an unpacking and sieving station as well as an unused drum mixing station from EOS GmbH. This mixing station is ideally designed for use in combination with wide-neck drums. It enables the efficient blending of sieved used powder with virgin powder over a defined period. The prepared powder mix can then be used in EOS Formiga P100 or P110 systems.

The unpacking and preparation station consists of:
• an unpacking area
• a sieving unit for used powder
• a feed for virgin powder
• and a scale for the preparation of plastic powder.

After removal from the machine, the cooled exchange frame is inserted into the unpacking and preparation station. By gradually raising the build platform using a foot pedal, the powder bed with components is pushed out of the exchange frame. The sintered parts are manually unpacked from the powder bed.

Bodpfx Absxzpw Sjtelr
Reusable used powder from the powder bed is pushed onto the adjacent perforated plate and falls through a hose into a sieve bowl. The used powder is sieved into a powder container placed on a scale beneath the sieving unit. The scale enables precise measurement of the quantity of recycled powder. Then, by turning the hand crank, a pre-determined quantity of virgin powder is fed into the powder container with the recycled powder.

The prepared plastic powder then needs to be mixed in the mixing station before it can be used again in the build process.

Mixing station
We are offering an unused drum mixing station from EOS GmbH.
In the mixing station, virgin and recycled powder, filled into powder containers by the unpacking and preparation station, are mixed. A powder container is rolled or placed onto the mixing station and then rotated continuously for a pre-set period. After the time has elapsed, the mixing station stops and the powder container can be removed.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.