Pajisje për matjen e kontureve/ashpërsisë

ConturoMatic TS-X NEU

High-end contour and roughness measuring system with air-bearing motion axes, up/down measuring function and X-sensing.
Anytime optionally via software updatable functions:
- Motorized Y-Supporting table

Scope of supply:
- Basic mechanics with integrated Y-adjustment table
- Integrated control system
- integrated gauging force regulation
- software option roughness
- Software option for measurement and evaluation of the following standards:
DIN EN ISO 4287 (10/1998)
DIN EN ISO 4288 (04/1998)
DIN EN ISO 11562 (04/1998)
DIN EN ISO 13565-1 (04/1998)
DIN EN ISO 13565-2 (04/1998)
VDA 2006 (07/2002)
Stahl-Eisen-Prüfblatt (SEP 1940)
- PC W11/64Bit; 24"TFT flat screen;
- Compressed air unit consisting:
Particulate filter 25µm/0.1µm, oil filters and water separator
2 precision pressure regulator mounted on base with stand
- ConturoMatic Software; user manual
- Software add-on for roughness calculation
- Cable set
- Protective cover, sturdy and water repellent (material), Commodity-Code 63079098
Description of the up down function:
The scanning of surfaces in two directions is possible by the measuring direction switching function.
This can be assessed without loss of the relationship to other scans from the same measuring process.
Inside and external scans can be calculated to each other. This function is suitable without restrictions in automatic measurement programs.
Additional evaluation possibilities are for example
- Raceway diameters
- Diameter
- Thickness variation
- Parallelism
- Cone angle measurement
- Calculation of pitch deviation
- Thread testing (thread calculation software optionally)
etc.

Technical data contour and roughness measurement:
Aerostatic linear bearings (X and Z)
Measuring range Contour 280mmx350mm (X/Z)
Measuring range Roughness 280mmx350mm (X/Z)
Suitable range Ra Ra from 0.05µm*
Suitable range Rz Rz from 0.5µm*
Resolution 1nm
Sensing system optically incremental
1 point measuring in X direction (static)
Accuracy +/-(0.85µm+L/100)µm* [L=mm]
Itjdpfxowzlcaj Ahyjf
Measuring speed contour 0.1-3mm/s self-optimizing
Measuring speed roughness 0.1-0,5mm/s self-optimizing
Positioning speed up to 25mm/s
Probing force contour 30mN
Probing force roughness 7.5mN
Table load 25kg
weight: 96kg

* According to our specified terms-
Subject to change without notice