Raft për punë të rënda4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
Raft për punë të rënda
4 Stück Kragarmregal-Ständer einseitig
Höhe 2,56 m/ Nutztiefe 1,0 m/ Länge 4 m
VB plus TVSH
1 490 €
viti i prodhimit
2024
Gjendje
makinë ekspozite
Vendndodhje
Bad Feilnbach 

Fotot tregojnë
Shfaq hartën
Të dhëna për makinën
- Përshkrimi i makinës:
- Raft për punë të rënda
- Viti i prodhimit:
- 2024
- Gjendje:
- si e re (makineri ekspozite)
Çmimi & Vendndodhja
VB plus TVSH
1 490 €
- Vendndodhje:
- Johann-Flitsch-Straße 8, 83075 Bad Feilnbach, Deutschland

Telefononi
Detajet e ofertës
- ID e shpalljes:
- A5776089
- Përditësim:
- së fundmi më 28.01.2025
Përshkrim
Cantilever rack in painted version (RAL 7016 anthracite):
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
Psdpfx Asguk A Hjbpogu
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Scope of delivery:
4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth)
12 cantilever arms with 1.0 m usable depth
Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m)
Fastening material (screws, nuts and washers)
(*No paint damage!)
Net price on collection: € 1,490.00 plus VAT.
Delivery possible for an additional charge
Detailed description:
- Sturdy steel construction made of IPE profiles (screw system)
- Surface painted in RAL 7016 (anthracite)
- Shelf height 2,560 mm
- Load capacity per upright 1,800 kg
- Foot section and cantilever arms with 1,000 mm usable depth
- Cantilever arms height-adjustable in 100 mm increments
- 3 screw-on cantilever arms per upright, standard (= 4 storage levels)
- Load capacity per cantilever arm 600 kg
- Including longitudinal and diagonal bracing for 1,300 mm spacing
- Shelf length = 4,000 mm
- Including fixing material (without floor anchors)
- With assembly instructions and load plates C4 according to DIN standard
- Made in Germany
- Short delivery time
- On-site collection possible
Our cantilever racks are produced exclusively in Germany.
We offer reliable freight with notification prior to delivery.
The material is sensibly packed to enable easy unloading.
The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required.
Psdpfx Asguk A Hjbpogu
The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended.
According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.
Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.
Ofrues
Shënim: Regjistrohuni falas ose hyni, për të parë të gjitha informacionet.
I regjistruar që nga: 2019
Dërgo kërkesë
Telefon & Faks
+49 8064 ... njoftime
Njoftimi juaj u fshi me sukses
Ndodhi një gabim







