Grirëse druri

mütek Systemtechnik MRZ 630

Special price for our demonstration machine
Another machine, available immediately (ex works Neckartailfingen)
Approx. 8 operating hours.

Suitable for shredding residual wood of all kinds, including pallet sections.

Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively.

A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket.

Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared.

*Conveyor belt and overband magnet available at an extra charge.

+ Powerful 18.5 kW motor,
+ Concave blades,
+ Large high-performance gearbox,
+ Special, load-dependent slide control,

Commodity code: 84659600
Motor: 18.5 kW; 400 V - 50 Hz - 3 ph.
Blades: 15 pieces, can be rotated multiple times
Optional double blade row + €995 net
Rotor diameter: 260 mm
Control: Siemens S7-1200 PLC
Cutting unit opening 630 x 820 mm
Filling volume approx. 0.6 m³
Hydraulically operated slide
Screen hole size selectable (10 - 30 mm)
Suction nozzle Ø 160 mm
Weight approx. 1,300 kg (depending on accessories)
Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm
Moisture content: < 30 % dry basis

Standard features include:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC control
- Automatic star/delta start
- Fast hydraulics
- Auto. OFF when the rotor is idling
- Speed 70-90 rpm for high throughput performance
- Cycle control to avoid idle times
- Performance-enhancing step control of the hydraulic slide
- Pertinax guides for the hydraulic slide
- Vibration-damping machine feet
- CE compliant
- MADE IN GERMANY

Options for shredder:
- Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net
- Articulated conveyor belt + €8,770 net
Horizontal part: 1200 mm
Inclined part: 2500 mm
Angle: Adjustable from 0-60 degrees
Discharge height: approx. 2000 mm
+ - 100 mm

Ijdpfjdwktksx Aanoif
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Start and stop synchronized with the shredder)
- Extend hopper + €940 net
- Eco-rings: + €1,980 net
(recommended for more than 15% hardwood)
- Special scraper + €990 net
(recommended for veneer or paper)
- Double blade row + €995 net

Requirements for raw material:
- The moisture content (dry basis) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Njoftimi është përkthyer automatikisht. Mund të ketë gabime në përkthim.